[ PRE ORDER ] Retro Vintage Classic 0-10 Bar Oil Pressure Gauge Yellow WHITE LED 2" 52mm Oil Pressure Meter with Sensor 1/8NPT for Car Boat - BN

Selamat Berbelanja dan mohon baca rincian pd deskripsi :)
- Delivery from Singapore/China
- Estimasi waktu pengiriman 7-10 Hari sampai alamat (Pengiriman Express)
- Harga sudah termasuk Ongkir + biaya Pajak
- Packing Safety
- Trusted Seller (Amanah)
- Jaminan uang kembali jika barang diterima berbeda !!!
- TIDAK MELAYANI TRANSAKSI COD!!!
how to install:
1.Cut a 52mm (2 1/16 ) diameter panel hole (II).
You will need a minimum clearance of 55mm (2 3/16 )behind the panel to fit the gauge.
2.Remove fastening ring (I).
There is an alignment tab on the gauge body (III), place the gauge in the panel hole and mark the position of this tab to correctly align the gauge.
3.Insert gauge through panel from the front, fit and tighten fastening ring (I) from the rear.
4.Connect wires according to wiring instruction. Select either White or Yellow wires for backlighting. Wire colour corresponds with backlighting colour.
5.Insert wire harness (IV) into port at the back of the gauge
Please note if the gauge is a voltmeter, there is no Green wire.
Specification:
- Electronic 52mm Gauge (stepper motor)
- Yellow & Red background light for option
- Resistance Gauge Input Signal
- Oil Pressure Gauge: 0~10 Bar (10~180ohm)
- Working Voltage:12V/24V
- Working temperatures: - 40 to 85°C
- IP67 Waterproof
Package: 1PCS Gauge+Cable+Manual+Sensor
Specifications:
High-concerned chemical: None
Other Part Number: Gauge
Placement on Vehicle: front
Country/Region of Manufacture: China
Manufacturer Part Number: Oil Pressure Meter
Interchange Part Number: Vintage Gauge
Special Features: White Yellow Light
Item Weight: 140g
Item Height: 52mm
Item Width: 52mm
Item Length: 52mm
Brand Name: ZMFJH
Origin: Mainland China
Material: Plastic
OEM NO.: Gauge