4.8/ 5.0
95% pembeli merasa puas
21 rating • 12 ulasan
5(20)95.24%
4(0)0%
3(0)0%
2(0)0%
1(1)4.76%
Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp1.489.000
Drawing Robot Wifi ESP32 Plotter Pen Drawbot DIY CNC Arduino size F4
Rp1.489.000
- Kondisi: Baru
- Waktu Preorder: 7 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Featured
DIY Drawrobot CNC Plotter Pen berdasarkan pada project CNC Open-Source cek disini github dot com/bdring/Grbl_Esp32 Kelebihan dari fitur Drawbot ini adalah koneksinya melalui Wifi dan dapat printing/drawing sendiri dari microSD tanpa harus konek ke laptop atau PC.
Print area X 33cm, Y 23cm atau setara ukuran F4.
Kelengkapan:
- Controller ESP32 + A4988 + Shield Drawbot
- Stepper Motor Nema17 (second)
- Servo MG90
- MicroSD 8GB
- Limit switch cable X amp; Y
- 5 x Bearing
- 8 x Sliding Bearing
- GT2 Belt 2M
- Adaptor 3A 8V (second)
- Frame Set Acrylic Hitam
- 4 x Stainless Shaft diameter 8mm
- Stainless Shaft ulir M8
- 2 x Stainless Shaft diameter 3mm
- Support Set 3D Printed part
- Set Baud and Nut M2, M3, M4, M8
- Spidol/Pen
- Software Lightburn (Win)
Print area X 33cm, Y 23cm atau setara ukuran F4.
Kelengkapan:
- Controller ESP32 + A4988 + Shield Drawbot
- Stepper Motor Nema17 (second)
- Servo MG90
- MicroSD 8GB
- Limit switch cable X amp; Y
- 5 x Bearing
- 8 x Sliding Bearing
- GT2 Belt 2M
- Adaptor 3A 8V (second)
- Frame Set Acrylic Hitam
- 4 x Stainless Shaft diameter 8mm
- Stainless Shaft ulir M8
- 2 x Stainless Shaft diameter 3mm
- Support Set 3D Printed part
- Set Baud and Nut M2, M3, M4, M8
- Spidol/Pen
- Software Lightburn (Win)
Ada masalah dengan produk ini?