PRODUCT FEATURE - Functional 3/16" breathable neoprene knee brace. - Polycentric hinge with flexion and extension pin-stops for controlled range of motion. - Lightweight, open patella design. - Increases stability and provides support and protection.
HOW TO WEAR - Please follow the doctor's instruction. The following is the step of setting the angle. Open cap cover. Release pins, select correct settings and reinsert pins. To lock uprights in fixed 0 angle, set four pins setting at 0. To lock in 10, 30, 50, 70, 90, and 110 of extension or flexion, set the two extension-pins on each hinge at desired setting in the location marked lock and the two flexion-pins in corresponding (same number) setting in the open opposing position. Repeat the procedure on the opposite side of knee support to match the new settings. - Insert foot into knee stabilizer and pull up to the knee. - Be sure the opening is on kneecap and hinge axis align with the knee joint. - Secure the upper two small hook and loop straps. - Thread through buckles and secure the upper and lower hook and loop straps to desired compression.
APPLICATION - Post surgical use - Patellar subluxation/tilting - Collateral ligament injury - Cruciate ligament sprain - Moderate sprain/ strain
SIZING Measure around the mid-section of the knee, while in a standing position. S : 33.3-37.5cm M : 37.5-40.6cm L : 40.6-45.1cm XL : 45.1-50.2cm XXL : 50.2cm - up