Semua produk di etalase DOoFPV ready stock, bisa langsung dipesan. Proses kirim harian tiap Senin-Jumat jam 3 sore.
Join whatsapp group DOoFPV untuk info barang baru : https://bit•do/doofpv
Airbot 4in1 ESC teknologi terbaru menggunakan prosesor - MCU F3 dan support 45A continuous - 55A burst dan New Technology MOSFET sehingga bisa dibuat dalam bentuk mini.
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
Supports up to 55A burst and 45A continued.
32bit ESC with BLHELI32 firmware
Supports 3-6S lipo input
PWM input, TLM supported
Voltage output (VBAT)
Supports oneshot / Multishot / Dshot PWM
Supports damped light
F3 MCU, runs double faster than F051
Extra Cap needed for high current or 6s usage
Mounting holes 20x20mm, 2mm (M2)
First of all, it can run input signals with lower latency at faster rates.
Dshot up to at least Dshot1200, and at rates up to at least 32kHz is now supported.
- programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them.
- auto timing. Which is not the option to choose if you’re after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.
- voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure.
- Like programmable brake on stop force. Which allows control of the braking of fixed wing props.
- Like improved direction change in bidirectional mode.