New TTGO LoRa32 V2.1 868Mhz ESP32 LoRa OLED 0.96 Inch SD Card
Selamat Datang di FURIZAME Store :
🏷 Budayakan Membaca Sebelum Membeli!
🏬 Semua Barang PO (Pre-Order)
✈️ Pengiriman Super Cepat, Kebanyakan Barang Yang Kami Kirimkan 8-15 Hari Sudah Sampai
🔒 Packing Aman dan Secure
❤️ Produk Original
💬 Harap Chat Terlebih Dahulu Sebelum Order
Happy Shopping !
Working voltage: 1.8~3.7VAcceptable current: 10~14mATransmit current: 120mA@ 20dBm 90mA@ 17dBm 29mA@ 13dBmOperating frequency: 868MHzTransmit power: 20dBmReceive sensitivity: -139dBm@LoRa 62.5KhzSF=12146bps-136dBm@LoRa 125KhzSF=12293bps-118dBm@LoRa 125KhzSF=69380bps-123dBm@FSK5Khz1.2KbpsFrequency error: /-15KHzFIFO space: 64ByteData rate: 1.2K~300Kbps@FSK 0.018K~37.5Kbps@LoRa Modulation Mode: FSK, GFSK, MSK, GMSK, LoRa TM, OOKInterface form: SPISleep current: 0.2uA@SLEEP 1.5uA@IDLEOperating temperature: -40â„ƒ- 85â„ƒDigital RSSI functionAutomatic frequency correctionAutomatic gain control RF wake-up functionLow voltage detection and temperature sensorFast wake-up and frequency hoppingHighly configurable data packet handlerSMA AntennaIP5306More product information, go to: https://github•com/LilyGO/TTGO-LoRa32-V2•1At
the TTGO LoRa V2.1, we add the SMA and IP5306 to the board, which make it can do more things. In terms of the power switch, we have changed the switching interaction mode. The added SMA antenna can enhance signal transmission.Package included: 1 x TTGO LoRa32 V2.1 868Mhz Module2 x Pin1 x Antenna1 x Power Cable(Notice:The shipping list does not include battery and SD card)About the lipo charging circuit problem (Important update in 10th September 2018):After V2.1-1.5 was upgraded to V2.1-1.6, after our tests, the diode components should be used on the charging circuit, but we used a fuse, the diode is unidirectional, and the fuse is bidirectional. This