Download Tokopedia App
Tentang TokopediaMitra TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Kategori
Atur jumlah dan catatan

Stok Total: Sisa 1

Subtotal

Rp20.000.000

Panel Gas Detector Crowcon Gas master 4

Rp20.000.000
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
Baru
Crowcon Gasmaster 4, Gas Detection Control Panel with Four 4-20mA Inputs
Self-sustaining alarm system for monitoring gas or fire, with digital display and control panel for the Crowcon gas sensors.

The Gasmaster 4 base unit is supplied without any input module and it can be equipped with max. 4 input modules.
There are 2 different types of input modules available, which need to be ordered in addition to the Gasmaster 4:
1. Input module for 4-20mA sensors and fire detectors
2. Input module for mV detectors
According to the application the Gasmaster 4 can be compositely equipped with 1 to 4 units of these input modules.

The Gasmaster 4-40-EUR-Z which we offer here, already contains 4 modules for 4-20mA sensors and fire detectors.

Technical data:
Power supply: 100-264 V AC / 50-60 Hz or 20-30 V DC, max. 60 W
Backup battery: built-in 1.2-Ah battery
Sensor inputs:
Gas: one to four 2- or 3- wire gas sensor for 4-20 mA current
loop (source or drain)
Fire: one to four loops of up to 20 conventional smoke/heat
detectors or manual alarm buttons, or one to four
flame detectors (4-20mA or digital contact signal)
ESU (sampler for gas and fumes): For use with one to four Crowcon ESU fans.
Remote inhibit: Via NO contact
Remote reset: Via NO contact

Outputs:
Relay outputs: 1-pole, DPCO contacts, changeover, 250 VAC / 8A
(non-inductive load)
The relays can be set as activated, non-activated,
blocking, non-blocking, or blocking acceptable.
Pre- alarm and main alarm per channel plus general
pre- and main alarm and error. The alarm relays
can be set for rising and falling alarms.
A/V alarm drive: 12 VDC or 24 VDC / 650mA max. drive.
Suitable for +ve or -ve switched alarms.
Analogue output: 4-20 mA for each channel (current source, max.
loop resistance: 700 Ohm) or 1-5 VDC
(min. load: 50 kOhm)
Digital output: RS-485 Modbus RTU for monitoring and control via
DCS/SCADA/SPS systems.
Communication port: For PC configuration and actualising of the event protocol
Logo Firenetic
Online 3 jam lalu

4.8 (77)

± 3 jam pesanan diproses

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan

Pilihan lainnya untukmu

Lihat Semua
Jakarta PusatJaya makmur 58
starstarstarstarstar(5)