Happymodel 2.4G ExpressLRS ELRS EP2 Long Range RC Receiver for ES24TX

Dianjurkan pakai Asuransi Pengiriman Tokopedia.
Ketentuan pemesanan tanpa Asuransi Pengiriman silakan baca pada Catatan Toko:
https://m.tokopedia.com/justshopit/info

Tambahan Bubble Wrap:
Bubble wrap untuk Pre-Order
https://www.tokopedia.com/justshopit/tambahan-bubble-wrap-khusus-pre-order-tidak-dijual-terpisah
Bubble wrap untuk Ready Stock
https://www.tokopedia.com/justshopit/tambahan-bubble-wrap-khusus-ready-stock-tidak-dijual-terpisah

OVERVIEW:
The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.

The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.

On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , thats too simple .

Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. And very suitable for Tiny whoop because of the ultra light and Nano size.

Specifications:
Item Name: EP2 Nano Receiver
Type: ISM
ESP8285 MCU
SX1280IMLTRT RF Module
SMD Ceramic antenna
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz
Working voltage: 5v
Weight: 0.44g
Dimension: 10mm*10mm*6mm
Peak gain: 3.7dB
Range: 2KM above (Open Area)
Open area means the receiving range refers to the test data without obstruction, using fixed-wing flying altitude greater than 150 meters, and transmitter power above 100mw.

Package Included:
1 x EP2 Nano Receiver