5.0/ 5.0
100% pembeli merasa puas
69 rating ā¢ 18 ulasan
5(68)98.55%
4(1)1.45%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
DFRobot : Analog pH Sensor / Meter Kit V2
Rp785.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 04 - DFROBOT OFFICIAL
šššš: ššššš šššššššš ššššš šššš šššššššš šš šššš šššššš ššššššššš
SKU: KB2004
FEATURES
3.3~5.5V wide voltage input
Hardware filtered output signal, low jitter
Gravity connector and BNC connector, plug and play, no welding
Software library supports two-point calibration and automatically identifies standard buffer solution
Uniform size and connector, convenient for the design of mechanical structures
SPECIFICATION
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.3~5.5V
Output Voltage: 0~3.0V
Probe Connector: BNC
Signal Connector: PH2.0-3P
Measurement Accuracy: Ā±0.1@25ā
Dimension: 42mm*32mm/1.66*1.26in
pH Probe
Probe Type: Laboratory Grade
Detection Range: 0~14
Temperature Range: 5~60Ā°C
Zero Point: 7Ā±0.5
Response Time: <2min
Internal Resistance: <250MĪ©
Probe Life: >0.5 years (depending on the frequency of use)
Cable Length: 100cm
SHIPPING LIST
pH Probe(Laboratory Grade) x1
pH Signal Conversion Board x1
Gravity Analog Sensor Cable x1
pH Standard Buffer Solution 4.0 x2
pH Standard Buffer Solution 7.0 x2
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screws x8
https://wiki.dfrobot.com/Gravity__Analog_pH_Sensor_Meter_Kit_V2_SKU_SEN0161-V2
SKU: KB2004
FEATURES
3.3~5.5V wide voltage input
Hardware filtered output signal, low jitter
Gravity connector and BNC connector, plug and play, no welding
Software library supports two-point calibration and automatically identifies standard buffer solution
Uniform size and connector, convenient for the design of mechanical structures
SPECIFICATION
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.3~5.5V
Output Voltage: 0~3.0V
Probe Connector: BNC
Signal Connector: PH2.0-3P
Measurement Accuracy: Ā±0.1@25ā
Dimension: 42mm*32mm/1.66*1.26in
pH Probe
Probe Type: Laboratory Grade
Detection Range: 0~14
Temperature Range: 5~60Ā°C
Zero Point: 7Ā±0.5
Response Time: <2min
Internal Resistance: <250MĪ©
Probe Life: >0.5 years (depending on the frequency of use)
Cable Length: 100cm
SHIPPING LIST
pH Probe(Laboratory Grade) x1
pH Signal Conversion Board x1
Gravity Analog Sensor Cable x1
pH Standard Buffer Solution 4.0 x2
pH Standard Buffer Solution 7.0 x2
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screws x8
https://wiki.dfrobot.com/Gravity__Analog_pH_Sensor_Meter_Kit_V2_SKU_SEN0161-V2
Ada masalah dengan produk ini?