Sherline Milling Machine Mesin Bor duduk 3 axis

Max clearance (table to spindle) : 203 mm
Throat (no spacer) : Optional
Throat (w/ headstock spacer)
AdjustableTravel, X Axis : 220 mm
Travel, Y Axis : 76 mm
Travel, Z Axis : 159 mm

Hole through spindle : 10 mm
Spindle nose thread 3/4-16
T.P.I.Spindle nose taper : #1 Morse
Spindle runout of Morse taper.0005 or less

Handwheel graduations : 0.01 mm

Electronically controlled spindle speed range 70 to 2800 RPM
Width Overall : 375 mm
Depth Overall
Base footprint:295 mm
With fully extended brass leadscrew cover 314 mm
Height Overall (Max.) : 527 mm

Table size : 70 x 330 mm
Hold-down provision2 T-Slots

Weight : 18.14 kg

Movements in addition to X-, Y- and Z-axes
Headstock rotation (90 left/right)
Column rotation(90 left/right)
Column pivot(90 forward/back)
Column swing(90 left/right)
Column travel(in/out) : 140 mm)

Motor
90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz.

Spindle Speed Range70-2800 RPM continuously variable by electronic speed control

The A Package Includes:

Drill Chuck w/ key, #1 Morse arbor with drawbolt

Step block hold-down set

5/32 Sherline hex T-driver

3-piece center drill set

Fly cutter w/carbide bit

3-piece mill collet set w/drawbolt

6-piece 3/8 2-flute double-ended end mill set (P/N 7401 4-flute set may be substituted depending on availability)

3/8 end mill holder

Millingvise

Sherline Accessories Shop Guidebook