The Active photoelectric Beam detectors are perimeter intrusion detector for outdoor application, E.g.: fence, wall, outside.
Introduction: The Active photoelectric Beam detectors are perimeter intrusion detector for outdoor application, E.g.: fence, wall, outside. In standby mode, the photoelectric beams will create some invisible infrared rays. Once anybody pass through them, the invisible infrared rays will be block, and create alarm signal then send to the alarm control panel.
Features : Integrated DSP chip, patented multi-dimensional fault-tolerant, true detection alarm technology. Wired/BUS compatible, 8 sections digital frequency conversion; Dynamic frequency analysis, intelligent alarm linkage; Unique displacement receiving, strong power digital filter; Intelligent power transmission, intelligent anti-fog; Adopt coaxial aspherical dual-focus exact optical focusing lens; Can adjust beams without opening outer case.
Spesification : Type :ABT-150 Outdoor detection distance :150 Indoor detection distance 400m Number of beams :2 Response speed :50～700m/s Alarm output-normal :Normally close and normally open（NC&NO）contact capacity AV/DC 30V/0.5mA Alarm linkage :√ Working voltage :DC 13.8～24V; AC 11～18V Working current :65mA Long-life mode :35mA Environment :temperature:-25℃～65℃; humidity: 5%—95% (RH) Tamper output :Normally close(NC) contact capacity AV/DC 24V/0.5mA Adjust angle :Horizontal:180°(±90°) ； Vertical:±10° Case material :Germany PC