5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp80.000
Arduino Uno R3 *New
Rp80.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Arduino
silahkan yang mau cashback*belanja lebih hemat: https://www•shopback•co•id/$1raf=yBp3hE
https://www•shopback•co•id/tokopedia$1raf=yBp3hE
NEW Arduino Uno R3 2016 dengan tambahan pin Analog A6 dan A7 + USB Cable
Model Number: UNO-CH340G/ATmega328P
Brand Name: RobotDyn
Form-factor: Uno Rev 3.0
Microcontoller: ATmega328P (SMD)
USB-UART interface: CH340G
Vin: 6-12V
Vout/Iout: 5V(800mA)/3.3V(180mA)
USB socket: MicroUSB
Power socket: DC Barel
Digital I/O: D0-D13
Analog I/O: A0-A7
New version of Uno R3 - More analog pins. Add A6, A7.
Uno R3 CH340G/ATmega328 - compatible with Arduino Uno R3 board. Built on the Atmel ATmega328 microcontroller and USB-UART interface chip CH340G.
Board for functionality similar to the Arduino Uno (ATmega 28). It is a budget, but the same stable, and uses the original chips Atmel ATmega328 (16 MHz).
The board used the chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Uno R3 CH340G/ATmega328 - connects to the computer via microUSB cable (used for almost all Android smartphones).
You can supply power to board through the MicroUSB connector or DC-jack. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC. Output current for 5V - about 800mA, for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.
https://www•shopback•co•id/tokopedia$1raf=yBp3hE
NEW Arduino Uno R3 2016 dengan tambahan pin Analog A6 dan A7 + USB Cable
Model Number: UNO-CH340G/ATmega328P
Brand Name: RobotDyn
Form-factor: Uno Rev 3.0
Microcontoller: ATmega328P (SMD)
USB-UART interface: CH340G
Vin: 6-12V
Vout/Iout: 5V(800mA)/3.3V(180mA)
USB socket: MicroUSB
Power socket: DC Barel
Digital I/O: D0-D13
Analog I/O: A0-A7
New version of Uno R3 - More analog pins. Add A6, A7.
Uno R3 CH340G/ATmega328 - compatible with Arduino Uno R3 board. Built on the Atmel ATmega328 microcontroller and USB-UART interface chip CH340G.
Board for functionality similar to the Arduino Uno (ATmega 28). It is a budget, but the same stable, and uses the original chips Atmel ATmega328 (16 MHz).
The board used the chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Uno R3 CH340G/ATmega328 - connects to the computer via microUSB cable (used for almost all Android smartphones).
You can supply power to board through the MicroUSB connector or DC-jack. The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC. Output current for 5V - about 800mA, for 3.3V - about 180mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.
Ada masalah dengan produk ini?