Technical Specifications: Working Range 75m (250 ft.) Note: actual range depends on RF signal absorption, reflection, and interference. Audio Channel Response Minimum: 45 Hz. Maximum: 15 kHz (overall system channel depends on microphone element). Total Harmonic Distortion 0.5%, typical Ref. +/- 33 kHz deviation, 1 kHz tone Dynamic Range >100 dB A-weighted, typical Operating Temperature Range -18C (0F) to +57C (+135F) Note: battery characteristics may limit this range Transmitter Audio Polarity Positive pressure on microphone diaphragm (or positive voltage to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
PG Receiver Output Impedance XLR connector: 200 1/4 inch connector: 1k Audio Output Level Ref. +/- 33 kHz deviation with 1 kHz tone XLR connector (into 100K load): -19 dBV, typical 1/4 inch connector (into 100K load): -5 dBV, typical Sensitivity -105 dBm for 12 dB SINAD, typical Image Rejection >50 dB, typical Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.) Dimensions PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.) Weight 241 grams (8.5 oz) Weight PG88 429 grams (15.1 oz) Housing Molded ABS Power Requirements 12-18 Vdc at 160 mA 320mA, supplied by external power supply
PG Handheld Transmitter Audio Input Level +2 dBV maximum at -10dB position -8 dBV maximum at 0dB position Gain Adjustment Range 10dB RF Transmitter Output 10 mW typical (dependent on applicable country regulations) Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.) Weight 218 grams (7.7 oz.) without battery Housing Molded ABS handle and battery cup Power Requirements One 9V alkaline or rechargeable battery