Atur jumlah dan catatan
Stok Total: 19
Subtotal
Rp5.800.000
Signal Generator Calibration HART MR9270S+ MrSignal 4-20mA Current CPU
Rp5.800.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Peralatan Teknik
Dikirim dari Jakarta dengan double kardus untuk keamanan produk
● The MR9270S+HART adopts a high-speed ARM CPU, with strong performance, stable operation, and user-friendly interface.
● Capable of simultaneously measuring and outputting signals (current, voltage, MV, frequency, resistance, thermocouple, thermal resistance, PT100)
● With functions such as HART protocol, MODBUS protocol, paperless recorder, signal conversion, real-time curve, programming output, etc.
Parameter：
1. Built in 3.6V 2500mA polymer lithium battery; The standby time is about 20 hours; The usage time varies depending on the usage situation (20mA continuous output can reach 8-10 hours)
2. Working environment: 0 ° C-50 ° C.
3. Internal reverse and overcurrent protection; Protection voltage: 30V
4. Size: 97mm * 76mm * 33mm
5. Weight: 189 gram
Features:
1. HART communication protocol.
2. Simultaneously measure and output signals.
3. The current and voltage signals can be programmed for output, with two output modes.
The first mode: Set the starting point, ending point, and number of cycles to start working.
The second mode: advanced mode, where signal changes are all set by parameters.
4. Pre set values: 9 sets of commonly used signal values can be preset for fast output.
5. Convert the input signal into an output signal, for example: convert the input frequency signal into a current signal, and convert the input range from 0-1000Hz to 4-20mA.
6. Real time curve: The change trend of input and output signals can be displayed through a curve, the collection time of the curve can be set, and the curve can be automatically displayed within a certain time range of maximum and minimum values.
7. Conversion of engineering quantity display: The signal is displayed as a signal value or engineering quantity, and the signal value corresponds line
● The MR9270S+HART adopts a high-speed ARM CPU, with strong performance, stable operation, and user-friendly interface.
● Capable of simultaneously measuring and outputting signals (current, voltage, MV, frequency, resistance, thermocouple, thermal resistance, PT100)
● With functions such as HART protocol, MODBUS protocol, paperless recorder, signal conversion, real-time curve, programming output, etc.
Parameter：
1. Built in 3.6V 2500mA polymer lithium battery; The standby time is about 20 hours; The usage time varies depending on the usage situation (20mA continuous output can reach 8-10 hours)
2. Working environment: 0 ° C-50 ° C.
3. Internal reverse and overcurrent protection; Protection voltage: 30V
4. Size: 97mm * 76mm * 33mm
5. Weight: 189 gram
Features:
1. HART communication protocol.
2. Simultaneously measure and output signals.
3. The current and voltage signals can be programmed for output, with two output modes.
The first mode: Set the starting point, ending point, and number of cycles to start working.
The second mode: advanced mode, where signal changes are all set by parameters.
4. Pre set values: 9 sets of commonly used signal values can be preset for fast output.
5. Convert the input signal into an output signal, for example: convert the input frequency signal into a current signal, and convert the input range from 0-1000Hz to 4-20mA.
6. Real time curve: The change trend of input and output signals can be displayed through a curve, the collection time of the curve can be set, and the curve can be automatically displayed within a certain time range of maximum and minimum values.
7. Conversion of engineering quantity display: The signal is displayed as a signal value or engineering quantity, and the signal value corresponds line
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan