Kopling Mesin FLENDER FLUDEX FAD 450 BORE @ MOTOR SIDE 75MM COUPLING
HARGA Include PPN 10%, Kami dapat menerbitkan Faktur Pajak untuk setiap transaksi Country of origin: GERMANY
>Peralatan Industri > Perlengkapan Mesin> Suku Cadang Industri > Power Transmission Product > Suku Cadang Peralatan / Mesin untuk Power Transmisi / Transmisi Energi Listrik menjadi Gerak/ Penggerak seperti Conveyor belt/ sabuk konveyor, gondola, pompa, ventilator, gir penggerak pada crane, dan mesin penggerak lainnya.
FLUDEX couplings are hydrodynamic fluid couplings which operate on the F"ttinger principle. The coupling parts on the input and output sides are not mechanically connected to each other. Output is transmitted via the oil filling which rotates in the coupling and is conducted over radially arranged blades. FLUDEX couplings limit starting and maximum torque in the drive train and, through the property of rotational slip, serve as an aid to starting the motor, as overload protection in the event of fault and for isolating torsional vibration. When large masses are started up, the drive train is accelerated only at the torque determined by the coupling characteristic. The starting operation is spread over time, the driven machine started softly and smoothly. In the case of special operating conditions, such as overload or blocking of the driven machine, the FLUDEX coupling limits the maximum torque load and prevents the inert effect of the rotating motor mass on the drive train. The coupling then acts as a load-holding safety clutch until the drive is shut off by the motor control or coupling monitoring system. The FLUDEX coupling further acts as a means of decoupling during torsional vibration excitation. Torsional vibration excitation with a frequency of > 5 Hz is virtually absorbed by the coupling. To compensate for shaft misalignment, the FLUDEX coupling is combined with a displacement coupling e. g. Neupex