BURKERT 8025 flowmeter or batch controller with paddle wheel

BURKERT 8025 Insertion flowmeter or batch controller with
paddle wheel and flow transmitter or remote
batch controller

Technical Data
Electrical connection Via Terminals Mounted in the enclosure
Connection cable Shielded, max. 1.5mm2
Protection Class Display IP65, Enclosure IP66
Relative humidity < 80%, without condensation
Ambient temperature 0 up to +60 deg C

Electrical Data
Compatibility Bürkert fl ow sensor with frequency output
(8020,8030, 8030HT, 8041, 8031, 8070,8071) and
other sensors with compatible electrical data.
Power Supply 115/230V AC 50/60Hz
Current consumption < 2.5A
Sensor input
Sensor Output
Voltage supply
Current consumption
2.5 up to 700 Hz – Open collector NPN, Coil, TTL,
CMOS
12...30 V DC or 0...18 V DC
Max. Current available from controller: 100 mA
Input 4 binary inputs, 5...30 V DC
Output
Batch status
Polarized, potential free, 5...30 V DC; 100 mA,
Protected , line drop at 100mA: 1.5V DC – for status
and alarm message 2 relays, freely programmable, 3A
230v AC