Reaim Mesin Las New MIG 400B ( 3 in 1 MIG+TIG+MMA ) Welding Machine Inventer Arc Gassless Welder Three Knob | Rekomendasi mesin las - MIG400B

Type: Reaim 3-IN-1(MMA+MIG+TIG)
Input Voltage: 220V/ 50Hz
Rated Input Current: 16.8 (MIG), 20.9 (MMA)
Output Current: 20-160A
Working Voltage: 15.5~20.0V
No Load Voltage: 60V
Duty Cycle: 40%
Power Factor: 0.73
Efficiency: 85%
Wire Feeder Type: Built-In
Wire Speed: 2~13m/min
Wire Dia.: 0.8/1.0mm (Flux Cored)
Insulation Class: F
Protection Class: IP21
Recommeded Thickness: ≥0.8
Dimesion: 41 x 26 x 26cm
Warranty: 1 Year
Gross Weight: 6.9 Kgs
Net Weight: 6.4 Kgs

Standard Accessories:
* Connected MIG torch 2 meter
* Electrode holder with cable 1.8 meter
* Earth clamp with cable 1.2 meter
* Brush/ hammer
* Protective mask

Features:
* Single PCB
* Adopt IGBT technology, Energy saving
* Anti-stick, thermostatic protection, less splash
* High efficiency, light, compact, easy to operate
* Suit for various welding rods such as acidity, alkalescence and heat resisting steel
* Mainly use in welding carbon steel, stainless steel, alloy steel and cast iron

Yang didapat :
- Mesin Las
- Stang Las
- Stang Massa
- Sikat kawat
- Kacamata/helm
***MIG-250***
Spesifikasi:
- Nama: Reaim MIG250 (Dapat digunakan tanpa gas)
- Kekuatan: 2800w
- Bahan: logam
- Tegangan: 220 V/50Hz
- Nilai Masukan Saat Ini: 16.8 (MIG), 20.9 (MMA)
- Arus Keluaran: 20-120A
- Working Voltage: 15.5~20.0V
- Power Factor: 0.83
- Efficiency: 85%
- Wire Feeder Type: Built-In
- Wire Speed: 2~13m/min
- Wire Dia.: 0.8/1.0mm (Flux Cored)
- Insulation Class: F
- Protection Class: IP21
- Recommeded Thickness: ≥0.8

Daftar Kemasan:
1 * Mesin Las 2in1
1*450g Kawat Las
1 * Obor MIG-14AK
1 * 200A Pemegang
1 * penjepit 300A
1 * Topeng
1 * sikat
1 * Pedoman
—————————————————————————
MMA-250 IGBT

* Kekuatan: 1300w
* Daya listrik kecil
* Bisa pakai genset
* Duty cycle 65%
* Bisa las argon dan stainless steel
* Maximum ampere 120 A
* Rated voltage 180-240V

Sebelum menggunakan harap baca dahulu buku manualnya.

Garansi 6 bulan full sparepart [1x reparasi].
Alamat Service center dapat dilihat pada kartu garansi.

Barang Original.
Foto sesuai dengan barang yang dijual.
Foto hasil jepretan sendiri.
—————————————————————————
ZX7-285 IGBT
Spesifikasi:
Kekuatan: 1300w
Tegangan input (V): 1 ~ 220-250
Frekuensi (Hz): 50/60
Arus keluaran (A): 32-105 Amp
tongkat las 2.5-4.0mm
Kelas isolasi: F
Kelas pelindung: IP21
Inverter IGBT
Layar LCD

Daftar Kemasan:
1 * Mesin Las MMA
1 * Menangani Kabel 1.8m
1 * Kabel Tanah 1,2m
1 * Topeng
1 * sikat
1 * Pedoman

Features:
• Single PCB
• Adopt IGBT technology, Energy saving
• Anti-stick, thermostatic protection, less splash
• High efficiency, light, compact, easy to operate
• Suit for various welding rods such as acidity, alkalescence and heat resisting steel
• Mainly use in welding carbon steel, stainless steel, alloy steel and cast iron