Standar Samping (Pendek) ENDURANCE HONDA CBR250RR (2016-)

Material: Iron (Powder Coating)
Mounting Time: 0.2h
It is Short Side Stand according to Endurance Low Link Kit.
We changed the shape.
When Low Link Kit is installed, since the car height is decreasing, the tilt of the car body becomes about 6 degrees with OEMSide Stand remaining, and because the tilt is small, it is in an unstable state at the time of parking, it is Large strange danger .

Originally, this vehicle tends to be less inclined, so Short Side Stand is mandatory Items when Low Link Kit is installed.
By installing this Side Stand, the tilt of the car body becomes about 12 degrees, (About 10 degrees in OEM state) , You can park with confidence by making the slope slightly larger than the OEM state by Large.

Even in the case of OEM vehicles, the inclination of the vehicle is small, so depending on the parking place it will be quite unstable.
If you mount the Short Side Stand in the OEM state, the angle of the car body is about 10 degrees (OEM) → Because it becomes 16 degrees, it stabilizes even when parking in a sloped place.
*This side stand correspond to ENDURANCE low link kit and OEM vehicle. It is unknown about corresponding with other products.
*The angle of the car body during parking is larger than the OEM inclination. Please use with care when parking.

In many cases of overseas purchase, it is a product that can not be guaranteed for the delivery date.
Therefore, the delivery date to be notified after receiving your order will be a guide, which may result in delay or cancellation of order.
[HONDA::CBR250 RR 17.5- (MC51-1000001-) ]
SKU : 23858398