Mellow All Metal NF-Crazy Hotend V6 Copper Nozzle Ordinary/Magnum

Description:

1.Conductive heat sinks are reduced by 85% compared to threaded heat breaks. Low thermal conductivity reduces the need for large heat sinks.
2.Small in size, but with a sturdy construction, only one hand can be used to tighten the nozzle. 3.The hot block nickel plating can reduce the wear of the thread and the oxidation of the hot block. The copper heat block can not soften at 550 C high temperature and has good thermal conductivity.
4.Suitable for almost any FFF/FDM printer, Can use a very simple installation solution.
5.It can save 20% time compared to other hot ends, and the working temperature can reach 450 C, which meets the needs of printing engineering plastics.
6.Supports the installation of 2510 fan

Set1 is suitable for use with small flow nozzles such as 0.2MM-0.4MM.

Set2 is a Magnum version similar to the volcano hot end, suitable for large flow nozzles such as 0.6MM-0.8MM, Support for faster printing

Package:

Set1:
1*Heat Sink
1*Ordinary Heat break
1*Plated Copper Heat Block
1*Plated Copper V6 Nozzle
1*Groove Mount Adapter
1Set Screws

Set2:
1*Heat Sink
1*Magnum Heat break
1*Heat Break Insulator
1*Plated Copper Heat Block
1*Plated Copper V6 Nozzle
1*Groove Mount Adapter
1Set Screws

Can be used for Ender 3/CR-10 with additional All Metal Mount Aluminum V6 Hotend Bracket :
https://www.tokopedia.com/3ddepo/all-metal-mount-aluminum-v6-hotend-bracket-for-ender-3-cr-10-printer