BELIMO GM24A DAMPER ACTUATOR

HARAP MEMBACA DESKRIPSI DAHULU SEBELUM MEMBELI.

BELIMO GM24A

Damper actuator for adjusting dampers in
technical building installations
• Air damper size up to approx. 8 m²
• Torque motor 40 Nm
• Nominal voltage AC/DC 24 V
• Control Open/close (unsuitable for 3-point
controls)

Electrical data :
Nominal voltage AC/DC 24 V
Nominal voltage frequency 50/60 Hz
Nominal voltage range AC 19.2...28.8 V / DC 19.2...28.8 V
Power consumption in operation 4 W
Power consumption in rest position 2 W
Power consumption for wire sizing 6 VA
Connection supply / control Cable 1 m, 3 x 0.75 mm²
Parallel operation Yes (note the performance data)

Functional data :
Torque motor 40 Nm
Direction of motion motor selectable with switch 0 (ccw rotation) / 1 (cw
rotation)
Manual override with push-button, can be locked
Angle of rotation Max. 95°
Angle of rotation note can be limited on both sides with adjustable
mechanical end stops
Running time motor 150 s / 90°
Sound power level, motor 45 dB(A)
Mechanical interface Universal shaft clamp reversible 12...26.7 mm
Position indication Mechanically, pluggable

Safety data :
Protection class IEC/EN III, Safety Extra-Low Voltage (SELV)
Power source UL Class 2 Supply
Degree of protection IEC/EN IP54
Degree of protection NEMA/UL NEMA 2
Enclosure UL Enclosure Type 2
EMC CE according to 2014/30/EU
Certification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14
UL Approval cULus according to UL60730-1A, UL60730-2-14
and CAN/CSA E60730-1
The UL marking on the actuator depends on
the production site, the device is UL-compliant
in any case
Mode of operation Type 1
Rated impulse voltage supply / control 0.8 kV
Pollution degree 3
Ambient humidity Max. 95% RH, non-condensing
Ambient temperature -30...50°C [-22...122°F]
Storage temperature -40...80°C [-40...176°F]
Servicing maintenance-free

TANYAKAN STOK TERLEBIH DAHULU SEBELUM ORDER
HARAP PERHATIKAN VARIAN YANG DIPILIH SAAT CHECKOUT
WA 0882-0010-24666