Sony a7iii body fan cooler (3d Print) DIY

PO 2 hari pengerjaan PANJANG KABEL 3METER Description : Body cooling fans for your Sony a7iii! Fan assembly replaces the stock eyepiece and is powered by USB. The area behind the LCD screen gets quite warm during video recording. The goal is to force air across this area to keep the camera body cooler. On my very first 4K shoot with the camera it overheated. While I have not had a problem since then (see “conventional methods” below) I can imagine a time where I will need to use the camera in more extreme conditions and will appreciate some additional peace of mind. Are there better ways to avoid overheating? Conventional methods such as keeping equipment out of direct sun, keeping the battery and SD card doors open, keeping LCD screen fully tilted and pulled out, using a LCD hood to keep screen brightness down, using a dummy battery, avoiding running on USB power so the battery doesn’t charge between takes, rotating batteries between takes/at breaks, turning the overheat shutdown setting to high, etc. will likely have more impact than these fans! Operating your camera in extreme conditions, ignoring overheat warnings, etc, may lead to equipment failure/damage, even when using these fans and all conventional methods listed above! Use at your own risk. Does it vibrate the camera? Not that I have noticed. Use between takes if this is a concern. How loud is it? Not very loud but you will definitely hear the fans while using the in-camera microphone. Use an external/wireless microphone or between takes if this is a concern. The good: Fun project. Blows air across hot part of the camera body.