5.0/ 5.0
100% pembeli merasa puas
264 rating • 67 ulasan
5(264)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
Step motor driver DM542 LEADSHINE
Rp565.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: CNC Controller & Driver
Genuine Driver Leadshine
Nema 23 (57)
https://www.tokopedia.com/3dp/mach3-usb-cnc-controller-card-5axis-200khz-dm542l-5pcs-12858
Nema 34 (86) https://www.tokopedia.com/3dp/leadshine-dma860h-stepper-driver-nema-34
Unique features Leadshine DM542:
Extremely cost-effective
Good high speed performance
Supply voltage up to +50VDC (24vdc recommended)
Output current up to 4.2A
Pulse frequency up to 300 KHz
Automatic idle-current reduction
3-state current control technology
Self-adjustment technology
Pure-sinusoidal current control technology
TTL compatible and optically isolated input
15 selectable resolutions in decimal and binary, up to 25,600 steps/rev
Suitable for 2-phase and 4-phase motors
DIP switch current setting with 8 different values
Support PUL/DIR and CW/CCW modes
Short-voltage, over-voltage, over-current protections
Small size (118x75.5x33mm)
Nema 23 (57)
https://www.tokopedia.com/3dp/mach3-usb-cnc-controller-card-5axis-200khz-dm542l-5pcs-12858
Nema 34 (86) https://www.tokopedia.com/3dp/leadshine-dma860h-stepper-driver-nema-34
Unique features Leadshine DM542:
Extremely cost-effective
Good high speed performance
Supply voltage up to +50VDC (24vdc recommended)
Output current up to 4.2A
Pulse frequency up to 300 KHz
Automatic idle-current reduction
3-state current control technology
Self-adjustment technology
Pure-sinusoidal current control technology
TTL compatible and optically isolated input
15 selectable resolutions in decimal and binary, up to 25,600 steps/rev
Suitable for 2-phase and 4-phase motors
DIP switch current setting with 8 different values
Support PUL/DIR and CW/CCW modes
Short-voltage, over-voltage, over-current protections
Small size (118x75.5x33mm)
Ada masalah dengan produk ini?