Atur jumlah dan catatan
Stok: Sisa 9
Subtotal
Rp540.000
Mellow All Metal NF-Crazy Plus Hotend For Ender 3 CR10 Ordinary/Magnum - Ordinary
Rp540.000
Pilih type: Ordinary
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Hotend MK7MK8
Description:
1. Conductive heat sinks are reduced by 85% compared to threaded heat breaks. Low thermal conductivity reduces the need for large heat sinks.
2. Small in size, but with a sturdy construction, only one hand can be used to tighten the nozzle.
3. Suitable for almost any FFF/FDM printer, Can use a very simple installation solution.
4. It can save 20% time compared to other hot ends.
5. Hot block aluminum can be very light. The aluminum heating block does not soften at a high temperature of 300 . Reduced production costs can have more favorable prices. Meet the needs of most customers who only need to print within 300 degrees Celsius.
6. The copper heat block can not soften at 550 C high temperature and has good thermal conductivity, and the working temperature can reach 450 C, which meets the needs of printing engineering plastics.
7. The framework is redesigned and can be installed directly on Ender 3 machine without any modification.
The original version supports the installation of 2510 fan, and now it can install 3010 fan directly.
Ordinary is suitable for use with small flow nozzles such as 0.2MM-0.4MM.
Magnum is a Magnum version similar to the volcano hot end,
suitable for large flow nozzles such as 0.6MM-0.8MM,
Support for faster printing.
Package:
Set1
1*Crazy Plus Heat Sink
1*Ordinary Heat Break
1*Aluminum Crazy-A Heat Block
1*Brass V6 Nozzle
1*V6 Groove Mount Adapter
1Set Screws
1. Conductive heat sinks are reduced by 85% compared to threaded heat breaks. Low thermal conductivity reduces the need for large heat sinks.
2. Small in size, but with a sturdy construction, only one hand can be used to tighten the nozzle.
3. Suitable for almost any FFF/FDM printer, Can use a very simple installation solution.
4. It can save 20% time compared to other hot ends.
5. Hot block aluminum can be very light. The aluminum heating block does not soften at a high temperature of 300 . Reduced production costs can have more favorable prices. Meet the needs of most customers who only need to print within 300 degrees Celsius.
6. The copper heat block can not soften at 550 C high temperature and has good thermal conductivity, and the working temperature can reach 450 C, which meets the needs of printing engineering plastics.
7. The framework is redesigned and can be installed directly on Ender 3 machine without any modification.
The original version supports the installation of 2510 fan, and now it can install 3010 fan directly.
Ordinary is suitable for use with small flow nozzles such as 0.2MM-0.4MM.
Magnum is a Magnum version similar to the volcano hot end,
suitable for large flow nozzles such as 0.6MM-0.8MM,
Support for faster printing.
Package:
Set1
1*Crazy Plus Heat Sink
1*Ordinary Heat Break
1*Aluminum Crazy-A Heat Block
1*Brass V6 Nozzle
1*V6 Groove Mount Adapter
1Set Screws
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan