Original Mellow 3D Printer NF Zone CR-10 Hotend Kit Aerospace Material - Set 1

The use of aerospace materials is an idea developed by the NF team in 2016. The location of the throat requires poor thermal conductivity and non-stick properties for printing materials. We have tried many experiments and finally completed it in 2020-08-15. We named this product series Zone, and hope that 3D printing enthusiasts will try new products in new Zone and create unlimited possibilities. The M6 thread position uses a special design and needs to be pressed by the nozzle to prevent it from rotating. Please don #39;t be surprised by the m6 thread rotation. This is normal. The heat sink design is inspired by BMG Wind, which allows the wind to blow from one side to the other. Benefit to the use of aerospace materials as the throat, the heat sink only needs a small volume to produce sufficient heat dissipation performance. Because the material is less sticky than metal, it reduces the blockage caused by the friction of the throat We have done an interesting experiment. When the air temperature is within 25 degrees Celsius, try to 195 degrees Celsius and set the filament back to 6mm to print. PLA finishes printing without using a fan to dissipate heat. Hope that customers can try some extreme tests to tell us the results, so that we can better improve product quality. Compatible: Ender 3, Ender 3 PRO, All printers using CR10 Hotend Package: Set 1: High Quality Aluminum Zone Cooling Block X 1 High Precision Brass Nozzle X 1 High Quality Aluminum Heating Block X 1 Set 2: High Quality Aluminum Zone Cooling Block X 1 High Precision Hardened steel Nozzle X 1 High Quality Copper Heating Block X 1 Set3: High Quality Aluminum Zone Cooling Block X 1 High Precision Copper Nozzle X 1 High Quality Copper Heating Block X 1 Tanpa Cartridge Heater dan Thermistor