LCR Meter ET430 Bridge Capacitance Inductance Resistance ET-430 Tester

Mohon tanyakan stock terlebih dahulu, LCR Meter ET430 digunakan untuk mengukur impedansi (Inductance, Capacitance, Resistance) dari sebuah komponen. Ready Warna : hitam biru Specifications Parameter: * Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 40kHz, 100KHz * Basic accuracy: 0.30% * Screen: 2.8 inch TFT * Display digits: main parameter 5 bits, sub-parameters 5 bits * Measurement parameters: main parameters L/C/R/Z, sub-parameters: X/D/Q/ESR/θ * Electrolytic capacitor mode: Yes * DCR Mode: No * Measuring range: L: 0.000μH~2000H; C: 0,000pF~20,000mF; R: 0.0001Ω~200.00MΩ * Measurement display speed: 1 time/second (slow speed), 2 times/second (medium speed), 4 times/second (fast) * Internal offset: No * Test level: 0.6Vrms * Calibration function: open circuit calibration, short circuit calibration * Filtering function: the filtering limit range can be set from 1% to 50%, where the fixed point is 1%, 5%, 10%, 20% * Deviation measurement: used to compare the deviation percentage between components and the * set nominal and display values Feature * Measuring frequency up to 100kHz, 1Hz step continuously adjustable * Support DC resistance, electrolytic capacitance measurement * Internal bias voltage output (10mV-500mV) * Automatic identification of component measurements * Supports deviation filtering and measurement * 2.8 inch TFT display, 4-1/2 screen * Basic measurement accuracy is 0.2%, measurement speed can be adjusted * Large capacity lithium battery power supply, USB communication interface, supports SCPI protocol * Manual and automatic range * With open circuit short circuit correction