Permatex Ultra Copper Maximum Temperature RTV Silicone Gasket Maker

Permatex Ultra Copper Maximum Temperature RTV Silicone Gasket Maker Net : 85 Gram Made in USA OEM specified. For high operating temperatures common in 4-cylinder, turbocharged or high-performance engines. The most advanced, high temp RTV silicone gasket available. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets. Temperature range -65F to 700F (-54C to 371C) intermittent; resists auto and shop fluids and vibration. - Automobile Suggested Applications: Exhaust manifolds/headers, turbo charger applications, and slip-fit exhaust parts. - Motorcycle Suggested Applications: Exhaust header flanges, slip fit exhaust pipes, and muffler end caps - Marine Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, intake manifold end seals, water pumps, exhaust tubes DIRECTIONS: 1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake amp; Parts Cleaner. 2. Cut nozzle to desired bead size gaskets are best formed using a 1/16 #34; to 1/4 #34; bead. 3. Apply a continuous and even bead of silicone to one surface, surrounding all bolt holes. Remove excess with knife at once. Assemble parts immediately. Do not squeeze out silicone by over tightening bolts. Re-torque will not be necessary. 4. Silicone dries in 1 hour, and fully cures in 24 hours, at 70F - 50% relative humidity. Allow more time in cold weather. 5. Replace cap after use. Clean hands with dry cloth or Permatex Fast Orange Hand Cleaner. Clean tools with non-flammable cleaning fluid. SKU : 3131/1251960238813921280/55