4.5/ 5.0
83% pembeli merasa puas
12 rating • 3 ulasan
5(10)83.33%
4(0)0%
3(0)0%
2(2)16.67%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
Nidec Brushless Motor Ultra-High Speed Vacuum Cleaner (8559) - DC18V
Rp120.000
Pilih warna: DC18V
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Tools dan power Tools
Nidec Brushless Motor Ultra-High Speed Vacuum Cleaner (8559)
The motor has a built-in high-power brushless drive.
The power supply originally used a 7S power lithium battery with a nominal voltage of 25.2V. The actual test can be within the widest working voltage range of 16V-30V.
Rated power is 350W. The fan is very violent, and the speed is estimated to be more than 100,000 revolutions per minute.
The motor also supports PWM signal speed regulation.
The minimum power for speed regulation is over 50 watts, and the maximum power is 350 watts.
The power supply must be a high-current power supply, and the power supply line must be thick and not too long.
The motor supports 16V-30V wide voltage operation. The maximum current of 16V can reach about 20A, the maximum current of 18V can reach about 20A,
the maximum current of 24V is about 15A, and the maximum current of 30V is about 12A.
The motor design is basically constant power operation, and the test is for reference only.
10-20khz duty cycle speed regulation for PWM signal 5V.
When the start pin and the PWM pin are combined and connected with a 10K resistor, and then connected to the positive pole of the power supply, the motor
runs at the highest speed.
There are two type cable : short dan long, will delivered according to the stock
There is no socket at the product
Harga per pc/ satuan
The motor has a built-in high-power brushless drive.
The power supply originally used a 7S power lithium battery with a nominal voltage of 25.2V. The actual test can be within the widest working voltage range of 16V-30V.
Rated power is 350W. The fan is very violent, and the speed is estimated to be more than 100,000 revolutions per minute.
The motor also supports PWM signal speed regulation.
The minimum power for speed regulation is over 50 watts, and the maximum power is 350 watts.
The power supply must be a high-current power supply, and the power supply line must be thick and not too long.
The motor supports 16V-30V wide voltage operation. The maximum current of 16V can reach about 20A, the maximum current of 18V can reach about 20A,
the maximum current of 24V is about 15A, and the maximum current of 30V is about 12A.
The motor design is basically constant power operation, and the test is for reference only.
10-20khz duty cycle speed regulation for PWM signal 5V.
When the start pin and the PWM pin are combined and connected with a 10K resistor, and then connected to the positive pole of the power supply, the motor
runs at the highest speed.
There are two type cable : short dan long, will delivered according to the stock
There is no socket at the product
Harga per pc/ satuan
Ada masalah dengan produk ini?