10" 12 15 17 Inch Embedded Industrial PC Panel computer Monitor with Resistive Touch Screen LCD Display with DVI Interface

Brand Name : Slubee
Display Size : 12"
Brightness : 250cd/m
Feature : Touch Screen
Origin : Mainland China
Certification : CE
Interface Type : DVI
Contrast Ratio : 800:1
Resolution : 1024 x 768
Panel Type : TN()
Screen Type : LCD
Display Ratio : 4:3
Built-in Speaker : No
Horizontal Viewing Angle : 80
Vertical Viewing Angle : 80
Refresh Rate : 60Hz
Bracket Type : other
Screen curvature : other
High-Dynamic Range : other
Hign-concerned Chemical : None


Industrial computer monitor with resistive touch screen with DVI+VGA+DC+touch USB

10/12/15/17 Inch Thin Flat LCD PC Monitor:
Size: 10/12/15/17 inch
Panel Type: Industrial Touch Screen LCD Display
Resolution: 10/12/15 inches (1024x768), 17 inches (1280*1024)
Interface: optional non-touch(VGA+DC, DVI+VGA+DC, HDMI+VGA+DC)
Resistive touch(VGA+DC+USB, DVI+VGA+DC+USB, HDMI+VGA+DC+USB)
Brightness: 250-350cd/m2 (support higher, please contact us for details).
Response time: 5ms
Display Color: 16.7M (8-bit)
Viewing angle: 80/80/80/80

touch screen parameters
Touch technology: Resistive technology (single touch).
Do you need to install the driver: Yes (download from the website: www.EETI.com).
Effective touch recognition: >1.5mm.
Touch mode: USB 2.0, 3.0.
Theoretical hits: over 50 million.
Touch principle: pressure sensing, touch force: 45g~250g.
Surface hardness: physical toughening, Mohs 7 explosion-proof glass.

Other parameters
Input power: 100-220V AC 50/60H
Output power: 12V 3-5A
Power consumption of the whole machine: <26W
Standby power consumption: <3w
Working temperature: -20-60
Working humidity: 0 (neither cold or hot)
Storage temperature: -40-85
Storage humidity: 10 (cold without doubt)

With DVI+VGA+DC+touch USB
If you need other interfaces and other questions, please contact our customer service. Thank you

Product Size
Size:10.4 inch

Resolution:1024*768 ppi
Size:12.1 inch

Resolution:1024*768 ppi
Size:15 inch

Resolution:1024*768 ppi
Size:17 inch

Resolution:1280*1024 ppi

One-finger resistive touch screen
Resistive single-point touch, the finger clicks anywhere on the system interface, you can operate quickly, and the touch has no drift, providing you with a more convenient touch platform

Runs 24 hours a day
The whole machine has the ability to run 24 hours a day, and is competent in all walks of life. It can be set to power on through the BIOS. It is suitable for an unstable environment that needs to be continuously powered on.

Efficient cooling system
Through the multi-row heat dissipation design of the metal rear shell, the technological breakthrough has a low noise heat dissipation effect, better stability and strong performance, no loud noise during operation, effectively protects the life of the accessories of the whole machine, and brings a better industrial use experience.

High and low temperature resistant design
The front frame is processed by high-precision CNC, and the steel body is forged by cold-rolling technology, which greatly increases the rigidity and compression resistance of the whole machine. It has been tested by a strict temperature control box and runs stably in harsh environments with large temperature differences.

About the material:
Using new industrial technology, the metal shell enhances the product's water resistance, gloss, hardness, corrosion resistance and drop resistance.
The stylish arc makes the overall metal texture better. Whether for commercial or industrial use, this will be an enviable piece of craftsmanship.

Installation method
Easy to install, one-key boot
1. Embedded installation
The cabinet needs to be opened before installation, and the opening size should be slightly larger than the opening size specified by the product.

Place the product in the embedded installation opening reserved on the installation panel.

There are two square holes on both sides of the device. When installing, use one end of the buckle to buckle the square hole, and the screw head on the buckle to hold the cabinet.
Then tighten the screws. The installation method of the other three prescription holes is the same to complete the embedded installation.

2. Wall-mounted installation
Fix the wall bracket A on the wall with expansion screws.
The wall bracket B is installed on the back of the all-in-one with screws.
Insert the back bracket of the all-in-one into the wall bracket to complete the installation.

About usage:
This product is widely used in industrial production workshop/engineering machinery/NC equipment/medical equipment/video surveillance/factory automation equipment/self-service terminal/vehicle advertising machine and other scenes or fields.

delivery time
Usually we choose DHL, UPS, Federal and other express companies to ship. The delivery time is 2-7 days, and the express delivery time is 5-20 working days (except for special circumstances).
Sample 1~5 pieces: 1~5 working days for delivery + express delivery time.
10~100 pieces: 2~7 working days for delivery + express delivery time.
More