DSTIKE WiFi Deauther Watch | Smart Watch / NodeMCU / ESP8266

DSTIKE WiFi Deauther Watch| Smart Watch/NodeMCU /ESP8266 Programmable Development Board-Black Welcome To My Shop : Budayakan Membaca Sebelum Membeli Barang Yang Anda Lihat Ini Barang PO (Pre-Order) Produk Import (Luar Negri) Pengiriman Super Cepat, Kebanyakan Barang Yang Kami Kirimkan 7-12 Hari Sudah Sampai Packing Aman dan Secure Produk Original Harap Chat Terlebih Dahulu Sebelum Order Untuk Ketersedian Barang DiGudang Import Happy Shopping ! What is it 1. Deauther Watch is still an ESP8266 development board, but you can wear it like a smartwatch.2. This ESP8266 development board comes with a 600mAh battery, OLED display and a 3-way momentary slide switch.3. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks. Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit here. You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board. GPIOs and hardware info Display: SH1106 1.3 #39; OLEDDisplay SDA: GPIO 5 (D1)Display SCL/SCK: GPIO 4 (D2)WS2812b LED: GPIO 15 (D8)Button Up: GPIO 12Button Down: GPIO 13Button Select: GPIO 14High Light LED: GPIO 16Side Button: GPIO0,GPIO2,RST Why did you make it I designed this development board especially for Spacehuhn #39;s great project: ESP8266 Deauther.  What makes it special Only 80mA power usageUp to around 7 hours work time200 mA charging currentIndicate charging LED (Red means charging, off means full)Included 8dB antenna and 2dB antennaPower Switch (Strongly recommend turn it off when charging)Protection: short, overcharging, over discharging, temperatureUsageYou can use it with the display and buttons. You can also connect to #39;pwned #39; with the password #39;deauther #39; and use the web interface. If you lost the password you can SKU - 1741849