5.0/ 5.0
100% pembeli merasa puas
31 rating • 11 ulasan
5(30)96.77%
4(1)3.23%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp358.000
CRIUS Power Module 28V 90A for Pixhawk APM2.8 APM2.6 APM Flight Contro
Rp358.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: UAV Flight Controller
SELAMA PRODUK TERPOSTING/TERLIHAT BERARTI READY STOCK !!!
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
==========================================
Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
Features:
'' Input voltage: 6~28V (support 30V)
'' Max current sensing: 90A
'' Voltage and current measurement configured for 5V ADC
'' Switching regulator outputs 5.3V0.1V and 3A max
'' 6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector
'' Dimension(mm): 25 x 21 x 9
'' Weight(g): 17(include all wire)
Package content (Soldered, as picture shows)
'' Power Module x 1
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
==========================================
Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
Features:
'' Input voltage: 6~28V (support 30V)
'' Max current sensing: 90A
'' Voltage and current measurement configured for 5V ADC
'' Switching regulator outputs 5.3V0.1V and 3A max
'' 6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector
'' Dimension(mm): 25 x 21 x 9
'' Weight(g): 17(include all wire)
Package content (Soldered, as picture shows)
'' Power Module x 1
Ada masalah dengan produk ini?