SELAMA PRODUK TERPOSTING/TERLIHAT BERARTI READY STOCK !!! LANGSUNG ORDER, TIDAK PERLU KONFIRMASI ======================================================================================================
This is the DJI Innovations Wookong-M Multi-Rotor Auto Pilot System.
The DJI Wookong-M Multi-Rotor stabilization controller is a complete flight system for all multi-rotor platforms and is the ultimate choice for commercial and industrial Multi-Rotor applications.
Specifications: Basic Performance Multi Rotor Types: Quad-Rotor: +4, x4; Hex-Rotor +6, x6, Y6, Rev Y6; Octo-Rotor +8,x8,V8 Supported ESC output: 400Hz refresh frequencys Recommended Transmitter: PCM or 2.4GHz with minimum 7 channels and Failsafe function available on all channels Recommended Battery: 2S~6S LiPo Power Consumption: MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V) Operating Temperature: -5C to +60C (You have to keep the IMU warm if you want to use it under low temperature, could be -5C or lower) Assistant Software System Requirement: Windows XP sp3 / Windows 7 / Windows 8 Flight Performance Hovering Accuracy Vertical: 0.5m; Horizontal: 2m Suitable Wind Condition: < 8m/s (17.9mph/28.8km/h) Max Yaw Angular Velocity: 150 deg/s Max Tilt Angle: 35 Ascent/Descent: 6m/s Hardware Weight: Total Weight: Dimensions Main Controller: 51.2x38.0x15.3mm IMU: 41.4x31.1x27.8mm GPS & Compass: 50mm (diameter) x 9mm LED Indicator: 25x25x7mm PMU: 39.5x27.5x9.7mm Built In Functions Three Modes Autopilot Enhanced Failsafe 2-axis Gimbal Support Low Voltage Protection Go Home & Auto Landing D-Bus Receiver Supported Intelligent Orientation Control
For further details, please check our website: http://www.aeroflyhobbies.com/flight-controllers/65-dji-wookong-multi-rotor-auto-pilot-system-wgps.html