5.0/ 5.0
100% pembeli merasa puas
63 rating • 19 ulasan
5(63)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
Holybro 433Mhz 500mW V3 Radio Telemetry Set for Pixhawk or APM
Rp1.490.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: UAV Flight Controller
SELAMA PRODUK TERPOSTING/TERLIHAT BERARTI READY STOCK !!!
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
======================================================================================================
Holybro 433Mhz 500mW V3 Radio Telemetry Set V3 for Air and Ground Data Transmit Module for APM Pixhawk.
Specifications:
• Dimensions: 26 x 53 x 10.7mm (without antenna)
• Power Supply voltage: 5VDC (from USB or JST-GH)
• Transmit current: 100 mA at 20dBm
• Receive current: 25 mA
• Serial interface: 3.3 V UART
Status LEDs
The radios have 2 status LEDs, one red and one green.
The meaning of the different LED states is:
• Green LED blinking - searching for another radio
• Green LED solid - link is established with another radio
• Red LED flashing - transmitting data
• Red LED solid - in firmware update mode
Connecting to Pixhawk PX4
Use the 4 pin JST-GH connector that should have come with the radio to connect the radio to your Pixhawk4’s “Telem 1” (“Telem 2” can also be used but the default recommendation is “Telem1”).
Connecting to a PC
Connecting the radio to your Windows PC is as simple as connecting the micro USB cable (which should have been included with the radio) to your PC. The necessary drivers should be installed automatically and the radio will appear as a new “USB Serial Port” in the Windows Device Manager under Ports (COM & LPT). The Mission Planner’s COM Port selection drop-down should also contain the same new COM port.
Included:
• Radio modules with antennas *2
• Micro-USB cable *1
• Android OTG adapter cable *1
• GH 6P-GH 6P cable *1
• MLX 6P-GH 6P cable *1
• Type C to Micro USB Adapter Converter
LANGSUNG ORDER, TIDAK PERLU KONFIRMASI LAGI.
======================================================================================================
Holybro 433Mhz 500mW V3 Radio Telemetry Set V3 for Air and Ground Data Transmit Module for APM Pixhawk.
Specifications:
• Dimensions: 26 x 53 x 10.7mm (without antenna)
• Power Supply voltage: 5VDC (from USB or JST-GH)
• Transmit current: 100 mA at 20dBm
• Receive current: 25 mA
• Serial interface: 3.3 V UART
Status LEDs
The radios have 2 status LEDs, one red and one green.
The meaning of the different LED states is:
• Green LED blinking - searching for another radio
• Green LED solid - link is established with another radio
• Red LED flashing - transmitting data
• Red LED solid - in firmware update mode
Connecting to Pixhawk PX4
Use the 4 pin JST-GH connector that should have come with the radio to connect the radio to your Pixhawk4’s “Telem 1” (“Telem 2” can also be used but the default recommendation is “Telem1”).
Connecting to a PC
Connecting the radio to your Windows PC is as simple as connecting the micro USB cable (which should have been included with the radio) to your PC. The necessary drivers should be installed automatically and the radio will appear as a new “USB Serial Port” in the Windows Device Manager under Ports (COM & LPT). The Mission Planner’s COM Port selection drop-down should also contain the same new COM port.
Included:
• Radio modules with antennas *2
• Micro-USB cable *1
• Android OTG adapter cable *1
• GH 6P-GH 6P cable *1
• MLX 6P-GH 6P cable *1
• Type C to Micro USB Adapter Converter
Ada masalah dengan produk ini?