1PCS DC 7.4V 12V 24V 200W 3-phase Brushless DC Drive 0-5V PLC High-speed 2-6S DC Motor Drive Board BLDC Speed Controller Module

Selamat Datang Di Toko Kami,
JIka Ada Pertanyaan Terkait Produk Jangan Ragu Chat Kami ya :)

Model Number : PWM Brushless Motor Speed Controller
Origin : Mainland China
Certification : RoHS
Motor Type : DC Motor
Voltage range : DC 6V-24V


Tips:Theproductmaybeupdatedconstantly,thecolorandappearancemaybechanged,pleasedon'tmind.Andtakeaconsiderationbeforeplacetheorderifyouhaverequestforcolororappearance.

Specification:

The drive board works when it is powered on, without external signal. It is equipped with a Potentiometer for stepless speed regulation (the key type can realize acceleration and deceleration through a single key)

Interface description:

1. U V W phase line output to the motor

2.VCC GND Main power supply (external DC power supply)

Product name: Single button (potentiometer) three-phase DC brushless Hall-free drive

Model: X30 (Single button) X30 V2(Potentiometer)

Working voltage: 6-20V(limit 26V) for 2-6S lithium

Driving current: Rated 16A plus fan cooling 25A

Power: Rated 160W-200W Peak 250W

Maximum speed: 224,000 RPM(2-pole motor), 74,000 RPM(6-pole motor), 40,000 RPM(12-pole motor), 35000RPM(14-pole motor).

Product size: L 36MM* W 26MM* H 10MM(excluding line and protruding capacitance)

Weight: 30g

Single button model instructions:

1. The key adjustment is different from the model aircraft adjustment. After this adjustment is powered on, the motor will rotate directly without throttle correction confirmation or external speed regulation signal. The speed of the motor can be adjusted through the button on the electric adjustment. Click the button (100 points), step by step increase (decrease) speed press the button does not move, the motor speed will always increase (or decrease), increase to the maximum, the speed will no longer change, release the button after pressing the button again, the motor speed will gradually decrease, when the speed decreases to 0 after the motor stops, release the button again to press the button, the speed will gradually increase. In this way, under the action of the key, the motor speed from small to large, and from large to small cycle in turn. After 3 seconds after releasing the button, the set speed will be automatically saved in the electric regulator, and after the power is off and the next power is restarted, the speed will be rotated according to the last set speed.

2. If you want to reduce (increase) speed in the middle of the increase (increase) speed, just press the button twice quickly and the increase (decrease) speed logic will be reversed.

Single key to accelerate or decelerate switch Under normal operation, by quickly pressing the button twice, the LED indicator light on the mainboard is in acceleration mode and the indicator light is in deceleration mode

-----------------------------------------------------------------------------

Potentiometer usage instructions:

Potentiometer speed regulation is different from model aircraft electric regulation. After this electric regulation is powered on, the potentiometer motor will turn directly without throttle correction confirmation or external speed regulation signal. The stepless speed regulation is increased clockwise and reduced anticlockwise by the potentiometer provided with the electric regulator.

Also applicable to external PLC 0-5V analog voltage signal control. The use method is to remove the potentiometer, the external 0-5 analog control signal and the ground wire, respectively, and the brushless driver board input signal end (black ground red signal into) are connected, as long as two wires are OK

Package include:

1PCS * Motor Driver