Atur jumlah dan catatan
Stok Total: 85
Subtotal
Rp4.783.000
WS2811 WS2812B WS2813 WS2815 RGBIC SPI-TTL Led Strip Light Controller T8K Music+DMX Console 8Channels Port With Mic in/Aux in
Rp4.783.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Products Specification
1. Working voltage: AC110V-220V
2. Rated power: 2W
3. Signal output port: 8 ports TTL data output, each port can carry up to 1024 pixels (1 chip = 1 pixel)
4. Control range: 1-8192
5. Working temperature: -30C~85C
6. Product size: 280*150*45MM
7. Net weight: 1KG
System Features
1.32-65536 gray control, software Gamma correction processing.
2. Support all kinds of point, line, and area light sources, support various rules, and special-shaped processing.
3. The controller has 8 port outputs, and each port can carry 1024 pixels.
4. With MIC microphone (Mic in) and headphone audio input interface (Aux in), adjust the sensitivity of audio reception through the Dimmer knob on the panel.
Luminaire Connection
1. Suitable for lamps and lanterns with single-wire IC.
2. Conventional wiring: GND wire connection controller GND port of lamp fixtures, DAT wire connection controller DAT port of lamps and lanterns, and then connect the positive and negative poles of the power supply.
4. Generally, the LED color strip uses a low-voltage power supply, the power supply voltage is between DC5V-24V, and the matching of the power supply should be consistent with the actual specifications of the lamp.
Parameter Settings
1. There are 4 buttons on the controller operation panel and 4 are digital displays.
2. Turn on after inserting the SD card, and the S-XX will be displayed.
4. Adjust the program playback speed by pressing the keys Speed- and Speed. (Display S XX)
5. Adjust the program mode by pressing the button Mode. P-XX is displayed in normal mode, C-XX is displayed in music mode, and long press the Mode button to switch between normal mode and music mode.
6. After the playback speed, playback program, and chip selection settings are completed, wait for 8 seconds until the display shows S-XX, and the controller saves the setting information, and there is no need to re-set it next time you turn it on.
7. In P mode, the controller can be connected to the DMX
1. Working voltage: AC110V-220V
2. Rated power: 2W
3. Signal output port: 8 ports TTL data output, each port can carry up to 1024 pixels (1 chip = 1 pixel)
4. Control range: 1-8192
5. Working temperature: -30C~85C
6. Product size: 280*150*45MM
7. Net weight: 1KG
System Features
1.32-65536 gray control, software Gamma correction processing.
2. Support all kinds of point, line, and area light sources, support various rules, and special-shaped processing.
3. The controller has 8 port outputs, and each port can carry 1024 pixels.
4. With MIC microphone (Mic in) and headphone audio input interface (Aux in), adjust the sensitivity of audio reception through the Dimmer knob on the panel.
Luminaire Connection
1. Suitable for lamps and lanterns with single-wire IC.
2. Conventional wiring: GND wire connection controller GND port of lamp fixtures, DAT wire connection controller DAT port of lamps and lanterns, and then connect the positive and negative poles of the power supply.
4. Generally, the LED color strip uses a low-voltage power supply, the power supply voltage is between DC5V-24V, and the matching of the power supply should be consistent with the actual specifications of the lamp.
Parameter Settings
1. There are 4 buttons on the controller operation panel and 4 are digital displays.
2. Turn on after inserting the SD card, and the S-XX will be displayed.
4. Adjust the program playback speed by pressing the keys Speed- and Speed. (Display S XX)
5. Adjust the program mode by pressing the button Mode. P-XX is displayed in normal mode, C-XX is displayed in music mode, and long press the Mode button to switch between normal mode and music mode.
6. After the playback speed, playback program, and chip selection settings are completed, wait for 8 seconds until the display shows S-XX, and the controller saves the setting information, and there is no need to re-set it next time you turn it on.
7. In P mode, the controller can be connected to the DMX
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan