5.0/ 5.0
100% pembeli merasa puas
15 rating • 4 ulasan
5(15)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
Motor Servo Futaba S3003
Rp37.100
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Motor Driver and Servo
Specification:
Control System: +Pulse Width Control 1520usec Neutral
Current Drain (4.8V): 7.2mA/idle
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Current Drain (6.0V): 8mA/idle
Operating Voltage: 4.8-6.0 Volts
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Operating Temperature
Range: -20 to +60 Degree C
Motor Type: 3 Pole Ferrite
Operating Speed (4.8V): 0.23sec/60 degrees at no load
Potentiometer Drive: Indirect Drive
Operating Speed (6.0V): 0.19sec/60 degrees at no load
Bearing Type: Plastic Bearing
Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
Gear Type: All Nylon Gears
Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm)
Connector Wire Length: 12"
Operating Angle: 45 Deg. one side pulse traveling 400usec
Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
360 Modifiable: Yes
Weight: 1.3oz. (37.2g)
Control System: +Pulse Width Control 1520usec Neutral
Current Drain (4.8V): 7.2mA/idle
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Current Drain (6.0V): 8mA/idle
Operating Voltage: 4.8-6.0 Volts
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Operating Temperature
Range: -20 to +60 Degree C
Motor Type: 3 Pole Ferrite
Operating Speed (4.8V): 0.23sec/60 degrees at no load
Potentiometer Drive: Indirect Drive
Operating Speed (6.0V): 0.19sec/60 degrees at no load
Bearing Type: Plastic Bearing
Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
Gear Type: All Nylon Gears
Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm)
Connector Wire Length: 12"
Operating Angle: 45 Deg. one side pulse traveling 400usec
Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
360 Modifiable: Yes
Weight: 1.3oz. (37.2g)
Ada masalah dengan produk ini?