4.9/ 5.0
95% pembeli merasa puas
22 rating • 5 ulasan
5(21)95.45%
4(0)0%
3(1)4.55%
2(0)0%
1(0)0%
ESP-32S
Atur jumlah dan catatan
Stok: 22
Subtotal
Rp67.840
NodeMCU ESP-32S WROOM WROVER 38 Pin WiFi Bluetooth Development Board - ESP-32S
Rp67.840
Pilih varian: ESP-32S
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: IoT ESP NodeMCU Series
The core of this module is the ESP32 chip, which is scalable and adaptive. Two CPU cores can be individually controlled. The clock frequency is adjustable from 80 MHz to 240 MHz and supports RTOS.
It is a general-purpose Wi-Fi+BT+BLE MCU module.ESP-WROOM-32s The module integrates traditional Bluetooth, Bluetooth low energy and Wi-Fi. Wide range of uses: Wi-Fi supports a wide range of communication connections, as well as a direct connection to the Internet via a router; Bluetooth allows users to connect to a mobile phone or broadcast a BLE Beacon for signal detection.
The module supports data rates up to 150 Mbps and antenna output power of 20dBm for maximum wireless communication. As a result, this module has industry-leading specifications and performs well in terms of high integration, wireless transmission distance, power consumption, and network connectivity.
Specifications :
- Microprocessor: ESP32
- Clock: up to 240MHz
- Performance: up to 600 DMIPS
- Flash: 4MB (32Mb)
- PSRAM: None
- Operating Voltage: 2 , 2V - 3,6VDC
- logic level: 3.3V (not 5V tolerant)
- operating current (typical): 80mA
- Interfaces: GPIO / capacitive sensors / ADC / DAC pre amplified LNA / CAN
- ADC: Up to 18 channels
- ADC Resolution:12 bit
- DAC: 2
- DAC resolution: 8 bits
- GPIO: PWM function, I2C and SPI
- Support WiFi & Bluetooth
- Dimensions: 26mm (L) X 16mm (A) X 48mm (C)
- Chip serial USB CH340
It is a general-purpose Wi-Fi+BT+BLE MCU module.ESP-WROOM-32s The module integrates traditional Bluetooth, Bluetooth low energy and Wi-Fi. Wide range of uses: Wi-Fi supports a wide range of communication connections, as well as a direct connection to the Internet via a router; Bluetooth allows users to connect to a mobile phone or broadcast a BLE Beacon for signal detection.
The module supports data rates up to 150 Mbps and antenna output power of 20dBm for maximum wireless communication. As a result, this module has industry-leading specifications and performs well in terms of high integration, wireless transmission distance, power consumption, and network connectivity.
Specifications :
- Microprocessor: ESP32
- Clock: up to 240MHz
- Performance: up to 600 DMIPS
- Flash: 4MB (32Mb)
- PSRAM: None
- Operating Voltage: 2 , 2V - 3,6VDC
- logic level: 3.3V (not 5V tolerant)
- operating current (typical): 80mA
- Interfaces: GPIO / capacitive sensors / ADC / DAC pre amplified LNA / CAN
- ADC: Up to 18 channels
- ADC Resolution:12 bit
- DAC: 2
- DAC resolution: 8 bits
- GPIO: PWM function, I2C and SPI
- Support WiFi & Bluetooth
- Dimensions: 26mm (L) X 16mm (A) X 48mm (C)
- Chip serial USB CH340
Ada masalah dengan produk ini?