Skyrc NC2500 Pro Charger & Analyzer

Skyrc NC2500 Pro Charger amp; Analyzer note : pic ke-2 hanya contoh penampakan charger Independent Six Slots, Adaptive-Current Charging NC2500 Pro has up to six independent slots to charge six cells simultaneously with the maximum 2.5A charge current. Once a high internal resistance is detected, the charge current will decrease automatically to reduce the overall heating to protect the battery. Light. Delight. Full of might. Adhering to SKYRC’s consistent minimal, compact and lightweight design for RC hobbyists, NC2500 Pro‘s rotary dial is the button that makes the operation more convenient. All at a Glance Six channels are displayed independently, all at a glance: current, voltage, capacity, elapsed time, and working mode. Take Charge of Your Battery NC2500 Pro has four working modes: charge, discharge, refresh, and break-in. With these four modes, you can charge and optimize your battery, and even you can rescue the battery from dying. BREAK-IN Applicable for new batteries and those stored for more than three months. The BREAK-IN mode is to activate the battery with a small charge and discharge rate in a charge-discharge-charge sequence. This process is also well-known as BATTERY FORMATTING and applicable to the batteries that cannot be rescued by the REFRESH amp; ANALYZE mode. FlexiPulse Overheating is Prevented The battery internal resistance usually increases as it is used. When the battery is used for a long time, its internal resistance will increase. The internal resistance consumes part of the electric energy when charging and causes the battery to heat up simultaneously. SkyRC deploys an innovative FlexiPulse algorithm for internal resistance detection in this charger. Once a high internal resistance is detected, the charge current will automatically decrease to reduce the overall heating and protect the battery.