DS18B20 Digital Temperature Sensor Suhu Module

The DS18B20 dig it al thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definit ion requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55C to +125C and is accurate to 0.5C over the range of -10C to +85C. In addition, the DS18B20 can derive power directly from the data line (parasite power), eliminating the need for an external power supply. Each DS18B20 has a unique 64-bit serial code, which allows mult iple DS18B20s to funct ion on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Features : - Unique 1-Wire Interface Requires Only One Port Pin for Communication - Each Device has a Unique 64-Bit Serial Code Stored in an On-Board ROM - Multidrop Capability Simplifies Distributed Temperature-Sensing Applications - Requires No External Components Can Be Powered from Data Line; Power Supply Range is 3.0V to 5.5V - Measures Temperatures from -55C to +125C (-67F to +257F) - 0.5C Accuracy from -10C to +85C - Thermometer Resolution is User Selectable - Converts Temperature to 12-Bit Digital Word in 750ms (Max) - User-Definable Nonvolatile (NV) Alarm Settings - Alarm Search Command Identifies and Addresses Devices Whose Temperature is Outside Programmed Limits (Temperature Alarm Condition) - Available in 8-Pin SO (150 mils), 8-Pin SOP, and 3-Pin TO-92 Packages - Software Compatible with the DSApplications Include Thermostatic Controls, Industrial Systems, Consumer Products, Thermometers, or Any Thermally Sensitive System