5.0/ 5.0
100% pembeli merasa puas
2 rating • 1 ulasan
5(2)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp35.800
Modul Wifi IoT NodeMCU Lua ESP8266 ESP12E V3 Lolin CH340
Rp35.800
Modul Wifi IoT NodeMCU Lua ESP8266 ESP12E V3 Lolin
ESP8266 merupakan perangkat mikrokontroller yang dilengkapi dengan kemampuan koneksi ke internet. dengan esp8266 kegiatan IoT atau kontrol jarak jauh dapat dilakukan. Perangkat ini sangat familiar di dunia IoT.
Kita juga bisa menggunakan IDE arduino untuk melakukan pemrogramannya
Spesifikasi
- Communication interface voltage : 3.3V.
- Antenna type : Built-in PCB antenna is available.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
- AD0 : 1 channel ADC
- Power input : 4.5V ~ 9V (10VMAX), USB-powered
- Current : continuous transmission : 70mA (200mA MAX), Standby : 200uA
- Transfer rate : 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature : -40 Deg ~ + 125 Deg
- Drive Type : Dual high-power H-bridge driver
- ESP8266 has IO Pin
- Don't need to download resetting
- A great set of tools to develop ESP8266
- Flash size : 4MByte
Isi Paket :
1 x NodeMCU v3 ESP8266
Tutorial menggunakan di ARDUINO IDE :
https://www.warriornux.com/cara-memprogram-dan-setup-nodemcu/
ESP8266 merupakan perangkat mikrokontroller yang dilengkapi dengan kemampuan koneksi ke internet. dengan esp8266 kegiatan IoT atau kontrol jarak jauh dapat dilakukan. Perangkat ini sangat familiar di dunia IoT.
Kita juga bisa menggunakan IDE arduino untuk melakukan pemrogramannya
Spesifikasi
- Communication interface voltage : 3.3V.
- Antenna type : Built-in PCB antenna is available.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
- AD0 : 1 channel ADC
- Power input : 4.5V ~ 9V (10VMAX), USB-powered
- Current : continuous transmission : 70mA (200mA MAX), Standby : 200uA
- Transfer rate : 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature : -40 Deg ~ + 125 Deg
- Drive Type : Dual high-power H-bridge driver
- ESP8266 has IO Pin
- Don't need to download resetting
- A great set of tools to develop ESP8266
- Flash size : 4MByte
Isi Paket :
1 x NodeMCU v3 ESP8266
Tutorial menggunakan di ARDUINO IDE :
https://www.warriornux.com/cara-memprogram-dan-setup-nodemcu/
Ada masalah dengan produk ini?