5.0/ 5.0
100% pembeli merasa puas
9 rating • 4 ulasan
5(9)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp760.000
DC Motor Driver 2x15A Lite -DFRobot
Rp760.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Functional Module
SKU : A11014
INTRODUCTION
This DC Motor Driver can be used in 4WD mobile robot platforms, combat robots, smart car competition, drive pumps, electric fans, conveyors, etc... This module uses 4 high-performance high-current driver chips (BTS7960) with the following protective functions: Current short, over temperature and over voltage . You can control 2 motors with only 4 digital IO at the same time. Dual 15A@13.8V max output current, good responsiveness braking performance. Four indicator leds are provided for easy and convenient debugging without motors. There are two AL Heat Sinks in the back of the module, to provide cooling for prolonged high-power working state. This DC Motor Driver module is directly compatible with Arduino.
APPLICATIONS
DC motor driver
4WD high-power mobile robot platform
Combat robots
Pumps
Electric fans
Conveyors
SPECIFICATION
Input Voltage: 4.8 ~ 35V
Maximum output current: 15A @ 13.8V per channel
Peak output current: 20A @ 13.8V per channel
PWM capability: up to 25 kHz
Interfaces: 4 digital IO (2 PWM output include)
Driving mode: Dual high-power H-bridge driver
Other specifications
Galvanic isolation to protect the microcontroller
Dual current detection diagnostic functions
Short circuit, overheating, over-voltage protection Size: 73 x 68 x 14mm (2.87x2.68x0.55inch)
INTRODUCTION
This DC Motor Driver can be used in 4WD mobile robot platforms, combat robots, smart car competition, drive pumps, electric fans, conveyors, etc... This module uses 4 high-performance high-current driver chips (BTS7960) with the following protective functions: Current short, over temperature and over voltage . You can control 2 motors with only 4 digital IO at the same time. Dual 15A@13.8V max output current, good responsiveness braking performance. Four indicator leds are provided for easy and convenient debugging without motors. There are two AL Heat Sinks in the back of the module, to provide cooling for prolonged high-power working state. This DC Motor Driver module is directly compatible with Arduino.
APPLICATIONS
DC motor driver
4WD high-power mobile robot platform
Combat robots
Pumps
Electric fans
Conveyors
SPECIFICATION
Input Voltage: 4.8 ~ 35V
Maximum output current: 15A @ 13.8V per channel
Peak output current: 20A @ 13.8V per channel
PWM capability: up to 25 kHz
Interfaces: 4 digital IO (2 PWM output include)
Driving mode: Dual high-power H-bridge driver
Other specifications
Galvanic isolation to protect the microcontroller
Dual current detection diagnostic functions
Short circuit, overheating, over-voltage protection Size: 73 x 68 x 14mm (2.87x2.68x0.55inch)
Ada masalah dengan produk ini?