Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp650.000
HiFi Shield for Odroid C1+
Rp650.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Odroid
SKU : A10024
Works with the ODROID-C1+.
The HiFi Shield provides both stereo RCA connectors and a 3.5mm stereo jack (all gold-plated) to connect to external amplifiers and other audio equipment. Via TI's high-end PCM5102 DAC chip, it supports 16, 24, 32 bit audio formats with minimal distortion (-93dB) and ideal dynamics (110dB+), plus amazing sampling rates of 384kHz.
Using the new I2S expansion on the C1+, we save a USB port and allow the user to select their audio playback system of choice, such as Volumio, RuneAudio or XBMC/Kodi for HiFi audio playback.
Functional introduction:
1. The DAC chip uses a high-end PCM5102 chip from Burr-Brown company (now part of TI) which utilizes the I2S interface. It supports 16, 24, 32 bit audio formats with minimal distortion (-93dB) and ideal dynamics (110dB+), plus amazing sampling rates of 384kHz.
2. The output ports include gold-plated stereo RCA terminals and a 3.5mm audio jack.
3. An ultra-low noise dropout regulator is coupled with two solid capacitors for the power supply, significantly reducing power supply noise and greatly increasing the signal to noise ratio.
4. The I2S interface allows for direct decoding of the digital input to analog output using master clock synchronization.
5. The PCB surface is comprised of gold-plating on top of 2 oz. of copper, ensuring signal continuity and reducing signal reflection and refraction.
* This HiFi shield is not functional with Android. We have no plan to support the Android OS to enable the I2S driver for Android Kernel and HAL.
Package include
- C1+ HiFi Shield Board
- 4 x 11mm PCB spacer (Metal)
- 8 x 10mm PCB spacer (Plastic)
BOARD DETAIL
Note!
1. The 7 pin map on C1+ board is reversed.
2. Pin 3 is 5V power. The print on the PCB is 3V3 which is inc
Works with the ODROID-C1+.
The HiFi Shield provides both stereo RCA connectors and a 3.5mm stereo jack (all gold-plated) to connect to external amplifiers and other audio equipment. Via TI's high-end PCM5102 DAC chip, it supports 16, 24, 32 bit audio formats with minimal distortion (-93dB) and ideal dynamics (110dB+), plus amazing sampling rates of 384kHz.
Using the new I2S expansion on the C1+, we save a USB port and allow the user to select their audio playback system of choice, such as Volumio, RuneAudio or XBMC/Kodi for HiFi audio playback.
Functional introduction:
1. The DAC chip uses a high-end PCM5102 chip from Burr-Brown company (now part of TI) which utilizes the I2S interface. It supports 16, 24, 32 bit audio formats with minimal distortion (-93dB) and ideal dynamics (110dB+), plus amazing sampling rates of 384kHz.
2. The output ports include gold-plated stereo RCA terminals and a 3.5mm audio jack.
3. An ultra-low noise dropout regulator is coupled with two solid capacitors for the power supply, significantly reducing power supply noise and greatly increasing the signal to noise ratio.
4. The I2S interface allows for direct decoding of the digital input to analog output using master clock synchronization.
5. The PCB surface is comprised of gold-plating on top of 2 oz. of copper, ensuring signal continuity and reducing signal reflection and refraction.
* This HiFi shield is not functional with Android. We have no plan to support the Android OS to enable the I2S driver for Android Kernel and HAL.
Package include
- C1+ HiFi Shield Board
- 4 x 11mm PCB spacer (Metal)
- 8 x 10mm PCB spacer (Plastic)
BOARD DETAIL
Note!
1. The 7 pin map on C1+ board is reversed.
2. Pin 3 is 5V power. The print on the PCB is 3V3 which is inc
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan