XH-W1209 Temperature Control Module

SKU : L02005

Technical details:
Control range: -50C ~ 110C
Input Power: DC 12V
Display Resolution: -9.9C to 99.9C with 0.1C resolution, other temperature ranges -50C ~ 110C = 1C Display Resolution
Measuring inputs: NTC (10K 0.5%) Waterproof sensor with 0.5 Meter cable
Measurement accuracy: 0.1 or 1.0 depending on range selected
Relay output: 1 pole 1 way (NO) 10A 150v AC relay LED indicator shows when relay is active
Control accuracy: also 0.1C
Adjustable Hysteresis
Hysteresis accuracy: 0.1C
Size: 48mm * 40mm * 18mm
Refresh rate: 0.5 Second
Power consumption: Static current: lt; gt;= 35mA with relay activated lt; gt;= 65mA
Display Type: 0.8 cm three digital LED seven segment display with adjacent relay active LED indicator

How to use:
Connect the power supply provided and the load through the relay connections marked K0 and K1
The present temperature at the probe is displayed.
Press the SET button, the display flashes the trip temperature.
Press + or - to set the desired trip temperature.
Press SET to confirm your temperature setting
The controller automatically changes the relay setting to off if the trip temperature is below the present temperature with Hysteresis
When the relay is off (open circuit) the LED indicator will be off If the seven segment LED display Shows:
LL the temperature sensor leads are open circuit.
HH the probe detects a temperature out of its range.
When out of range the thermostat will be forced to close the relay and it will display --- high temperature protection.