XL6009 Adjustable DC-DC Step Up Module

SKU : C05B08 The XL6009 module can take an input voltage of between 5 and 32V DC and converts it to an output voltage between 5 and 35V DC. You may use this module to generate high voltage up to 32V from small battery packs other power sources. Features Wide input voltage 3.5V ~ 32V, optimum manufacturer rated operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A) High switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz) Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current XL6009 Technical Parameters: Module Properties: Non-isolated boost (BOOST) Rectification: Non-Synchronous Rectification Input Voltage Range: 5V ~ 32V Output Voltage RAnge: 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency: lt;94% (greater the pressure, the lower the efficiency) Switching frequency: 400KHz Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation: ± 0.5% Voltage Regulation: ± 0.5% Operating Temperature: -40 ? ~ +85 ? Dimensions: 43mm * 21mm * 14mm (L * W * H) When using these modules remember that the output current will be a lot less than the input current, (remember – W = VA). For example, if you have a 10V output at 1A from a 5V input, the input current will be around 3.6A. The real-life maximum amount of power you can get out of these things is around 10W. If the Output current is greater than 2.5A (or output power greater than 10W) use with heatsink only.