CHAIRLIFT STAIRLIFT Lift Tangga model ELAN merek BRUNO pabrik USA

ELAN SRE 3000 / 3050 straight rail chairlift stairlift Load capacity 136 kgs. Slim design of luminium rail Hidden design of gear rack Made in USA RATED LOAD: 300 lb (136 kg) maximum NUMBER OF PASSENGERS: 1 POWER SOURCE: 24VDC comprised of 2 each 3AH 12 volt sealed maintenance-free lead acid batteries; On/Off power switch to prevent battery drain over lengthy storage periods CHARGER: 105-230VAC/1.5 A input, 24VDC/1 A output continuous monitoring, full primary cut off DRIVE: 24VDC, 16A direct drive self-locking positive geared motor, 2 pole rated 442 lb-in (50Nm) torque, 25.5 rpm output speed, with right angle worm gear box (0.18 HP max.) FINAL DRIVE: integrated 8dp gear rack on rail with a spur gear on the gearbox output shaft MOTOR CONTROLLER: custom 24VDC PWM controller with acceleration ramping BRAKING: dynamic motor braking through the motor controller, worm gear box, electro-mechanical motor brake and overspeed protection CALL/SEND CONTROL: infra-red wireless control; momentary switching requiring a user to continuously hold button to control unit ARMREST CONTROL: 3-position, momentary rocker switch requiring user to continuously hold rocker switch to control unit; switch mounted under armrest SUPPORTS: clamps anchored to stair tread; normal rail position is 2” (50.8 mm) above step nose; number of clamps dependent on the length of rail; optional height-adjustable clamps available ANGLE: 22° to 45° (specials up to 52°) SPEED: maximum top speed 18 ft/min (0.09 m/s); actual speed varies depending on rider weight LENGTH OF TRACK: 15 feet 9 inches (4.8 m) and 19 feet 8 inches (6.0 m) standard; dealer to cut to fit the actual length of the stair (see application guide) TRACK CONSTRUCTION: aluminum extruded rail with covered metal gear rack; bolted joint plate at each rail joint FOOTREST: folding footrest with safety sensor panel