Atur jumlah dan catatan
Stok Total: 22
Subtotal
Rp630.000
Single Contact Module NOHMI Model FRRU004-SCM4
Rp630.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Fire Alarm Equipments
NOHMI
FRRU004-SCM4 SINGLE CONTACT MODULE
The Single Contact Module (FRRU004-SCM4) is used to monitor the contact status of a device that contains a Normally-open contact (i.e, pull station, waterflow switch, etc). The FRRU004-SCM4 can be programmed in the panel to supervise either a normally open or Normally-closed contact on the Fire Alarm Control Panel (FACP). When the Normally-open contact is selected, and the contact is closed, the FRRU004-SCM4 reports its condition to FACP. Likewise when the Normally-closed contact is set as supervising condition, and the contact is opened, the FRRU004-SCM4 reports its condition to FACP. FRRU004-SCM4 supervises an open circuit of wiring connected to the terminal C and NO. FRRU004-SCM4 employs one red LED to indicate the status. In normal condition, the LED flashes. When the contact is activated, the LED will turn on constantly. In case of trouble, the LED will turn off.
FEATURES :
- One simple LED for status indication
- NFPA Class A (Styles 6 & 7) and Class B (Style 4) for SLC
- NFPA Class B (Style B) for IDC
- Electronic address setting
- Downsized unit
- Easy installation
SPECIFICATIONS :
1. Rated voltage range of SLC input power (S+,S-) : 22.0 to 24.0V
2. Maximum SLC 24 VDC standby current (S+,S-) : 250A
3. Maximum SLC 24 VDC alarm current (S+,S-) : 1mA
4. IDC input circuit wiring style : Class B (Style B)
5. End-of-line resistor for IDC : 5.1k, 1/2W
6. Maximum wiring resistance of IDC : 100
7. Maximum wiring capacitance of IDC : 1F
8. Operating temperature range : 0C to 49C (32F to 120F)
9. Operating humidity range : 0 to 93% (non-condensing)
10. Dimensions : 106mm (4.17 inches) (H) 106mm (4.17 inches) (W) 29mm (1.14 inch) (D)
11. Applicable electrical box for installation : North American 64mm (2-1/2 inches) deep 2-gang box Standard 4 inches square box 38mm (1-1/2 inch) deep box.
FRRU004-SCM4 SINGLE CONTACT MODULE
The Single Contact Module (FRRU004-SCM4) is used to monitor the contact status of a device that contains a Normally-open contact (i.e, pull station, waterflow switch, etc). The FRRU004-SCM4 can be programmed in the panel to supervise either a normally open or Normally-closed contact on the Fire Alarm Control Panel (FACP). When the Normally-open contact is selected, and the contact is closed, the FRRU004-SCM4 reports its condition to FACP. Likewise when the Normally-closed contact is set as supervising condition, and the contact is opened, the FRRU004-SCM4 reports its condition to FACP. FRRU004-SCM4 supervises an open circuit of wiring connected to the terminal C and NO. FRRU004-SCM4 employs one red LED to indicate the status. In normal condition, the LED flashes. When the contact is activated, the LED will turn on constantly. In case of trouble, the LED will turn off.
FEATURES :
- One simple LED for status indication
- NFPA Class A (Styles 6 & 7) and Class B (Style 4) for SLC
- NFPA Class B (Style B) for IDC
- Electronic address setting
- Downsized unit
- Easy installation
SPECIFICATIONS :
1. Rated voltage range of SLC input power (S+,S-) : 22.0 to 24.0V
2. Maximum SLC 24 VDC standby current (S+,S-) : 250A
3. Maximum SLC 24 VDC alarm current (S+,S-) : 1mA
4. IDC input circuit wiring style : Class B (Style B)
5. End-of-line resistor for IDC : 5.1k, 1/2W
6. Maximum wiring resistance of IDC : 100
7. Maximum wiring capacitance of IDC : 1F
8. Operating temperature range : 0C to 49C (32F to 120F)
9. Operating humidity range : 0 to 93% (non-condensing)
10. Dimensions : 106mm (4.17 inches) (H) 106mm (4.17 inches) (W) 29mm (1.14 inch) (D)
11. Applicable electrical box for installation : North American 64mm (2-1/2 inches) deep 2-gang box Standard 4 inches square box 38mm (1-1/2 inch) deep box.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan