2 in 1 Cable Tracer Digital Multimeer SEW 186CB

Fitur 2 in 1 Cable Tracer & Digital Multimeer SEW 186CB:_x000D_
_x000D_
Cable Tracer_x000D_
_x000D_
Trace wires or cables._x000D_
Volume control._x000D_
Tip & Ring identification._x000D_
2 bi-colored LEDs ( Line 1 & Line 2)._x000D_
Tone speed selection : Fast & Slow._x000D_
A phone jack is designed for headset or handset. (Amplifier probe)_x000D_
_x000D_
Phone Tester_x000D_
_x000D_
Continuity and resistance testing for voltage-free objects._x000D_
Check direct and alternating voltages._x000D_
Testing capacitors._x000D_
Testing diodes._x000D_
Power ON/OFF switch._x000D_
The indication of the LED lamp and the sound of the _x000D_
buzzer can occur at the same time._x000D_
The LED indication for Power ON status._x000D_
_x000D_
Spesifikasi Detail 2 in 1 Cable Tracer & Digital Multimeer SEW 186CB:_x000D_
_x000D_
Amplifier Probe_x000D_
Frequency 1Hz~12kHz_x000D_
Receiver distance < 50cm_x000D_
Sensitivity control _x000D_
Probe tip Fixed_x000D_
Power source 9V(6F22) 1_x000D_
Dimensions 230(L) 56(W) 27(D)mm_x000D_
Weight Approx. 125g (battery included)_x000D_
Tone Generator_x000D_
Wave form Square Wave_x000D_
Frequency 1kHz15%_x000D_
Over voltage _x000D_
protection 80V DC_x000D_
Single tone _x000D_
Alternating tone Fast and Slow_x000D_
Connection RJ11 connector, alligator clip x 2, _x000D_
Power source 1.5V (AA) 6_x000D_
Dimensions 143(L) 74.5(W) 33.6(D)mm_x000D_
Weight _x000D_
(battery included) Approx. 318g_x000D_
Phone Tester_x000D_
Loud speaker _x000D_
Continuity testing _x000D_
Checking resistance _x000D_
ACV/DCV checking _x000D_
Checking capacitors _x000D_
Checking diodes _x000D_
General_x000D_
Operating temp & _x000D_
humidity 0~40C, 80% Max._x000D_
Storage temp & _x000D_
humidity -10~50C, 80% Max._x000D_
Safety standard EN 61326-1 EN 55011 _x000D_
EN 6100-4-2 EN 6100-4-3