Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp567.000
Ori Arduino WiFi Control Kit with Arduino UNO R3 Board Motor
Rp567.000
- Kondisi: Baru
- Waktu Preorder: 15 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Ori Arduino WiFi Control Kit with Arduino UNO R3 Board Motor
Semua Produk Di Toko Kami Pre-Order 6-15 Hari Tergantung Stok dan Posisi Gudang. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15-Hari.
Descriptions:- The kit is equipped with a UNO control panel and a driver board as main controls in the chassis of the vehicle, plus a DT-06WiFi transparent transmission module so that the movement of the vehicle can be controlled through the WiFi signal using the mobile phone APP. - Suitable for all T-series tank cars in our shop.Specifications: More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wikiUpgrade Parts/Accessories: FrameFor Vehicle Type: TankMaterial: PlasticAbout the Arduino Uno Development Kit: Simultaneous control of 2 motor and 16 servos; Use bluetooth (reserved line interface) or WiFi control; Using a stack insert design. - Power connection method: Open circuit VM and VIN, (separate control motor, 6~36V); Open circuit VS and VIN (control servo independently, 6 to 18V); Short the VM and VIN while shorting VS and 5V. At the same time control the motor (6 ~ 18V) and 16 5V servosAbout the DT-06 Wifi Moudle:Supply voltage: 4.5V~6.0V, TTL voltage: 3.3V (5.0V compatible)Support baud rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/230400/460800/921600/1843200/3686400;Operating temperature range: -40C-125CWiFi supports AP, STA, AP STA three modesSupports reprogrammable, OTA firmware upgradesSupports serial AT commandsPackage List:1 x Arduino UNO R3 Board1 x Motor Drive Shield Board1 x DT-06 WiFi Module 1 x Dupont Line1 x USB cable1 x 18650 battery box1 set of copper pillarsThe source about UNO bluetooth wifi car for your
Nevo-1304360
Semua Produk Di Toko Kami Pre-Order 6-15 Hari Tergantung Stok dan Posisi Gudang. Harap Chat Terlebih Dahulu Sebelum Order Atau Anda Setuju Dengan Waktu Pre-Order Yang Kami Tetapkan Secara Default 15-Hari.
Descriptions:- The kit is equipped with a UNO control panel and a driver board as main controls in the chassis of the vehicle, plus a DT-06WiFi transparent transmission module so that the movement of the vehicle can be controlled through the WiFi signal using the mobile phone APP. - Suitable for all T-series tank cars in our shop.Specifications: More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wikiUpgrade Parts/Accessories: FrameFor Vehicle Type: TankMaterial: PlasticAbout the Arduino Uno Development Kit: Simultaneous control of 2 motor and 16 servos; Use bluetooth (reserved line interface) or WiFi control; Using a stack insert design. - Power connection method: Open circuit VM and VIN, (separate control motor, 6~36V); Open circuit VS and VIN (control servo independently, 6 to 18V); Short the VM and VIN while shorting VS and 5V. At the same time control the motor (6 ~ 18V) and 16 5V servosAbout the DT-06 Wifi Moudle:Supply voltage: 4.5V~6.0V, TTL voltage: 3.3V (5.0V compatible)Support baud rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/230400/460800/921600/1843200/3686400;Operating temperature range: -40C-125CWiFi supports AP, STA, AP STA three modesSupports reprogrammable, OTA firmware upgradesSupports serial AT commandsPackage List:1 x Arduino UNO R3 Board1 x Motor Drive Shield Board1 x DT-06 WiFi Module 1 x Dupont Line1 x USB cable1 x 18650 battery box1 set of copper pillarsThe source about UNO bluetooth wifi car for your
Nevo-1304360
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan