13S 48V 30A Li-Ion Lipolymer Battery Protection Board BMS PCB Board With Balance Heatsink For E-Bike Escooter

13S 48V 30A Li-Ion Lipolymer Battery Protection Board BMS PCB Board With Balance Heatsink For E-Bike Escooter
Continuous Discharge Current: 30A
Instantaneous discharge current:100A
Charging voltage: 54.6V
Maximum charging current: 30A
Overcharge detection voltage: 4.25±0.025V
Overcharge protection delay: 100±30ms
Overcharge release voltage: 4.05±0.1V
Overcharge detection voltage: 4.2±0.025V
Battery balance detection voltage: 4.2±0.025V
Battery balance release voltage: 4.2±0.05V
Battery balance current: 42±5A
Overdischarge detection voltage: 2.7±0.1V
Overdischarge detection delay: 100±30ms
Overdischarge release voltage: 3.0±0.1V
Overcurrent detection voltage: 150mV
Overcurrent detection delay: 10ms
Overcurrent protection current: 130±20A
Overcurrent protection release condition: disconnect load
Short circuit protection condition: external load short circuit
Short circuit detection delay: 300±100uS
Short circuit protection release condition: disconnect load
Main circuit conduction internal resistance: less than equal 15mΩ
Working current: less than equal 50uA
Sleep current (when the battery is over-discharged): less than equal 15uA
Temperature range: -30/+80°C
Size: 80*55*10mm
colour:Silver + green
Material:Metal + PCB
Package Contents:
1 * Li-ion Battery Protection Board
1 * Cabel wire
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.


Specifications:
Hign-concerned Chemical: None
Accessory Type: Battery Accessories
Origin: Mainland China