ESP32-C3 Mini devkitM Wifi Bluetooth Type C Development Board Module

#27

Library:
https://github.com/espressif/arduino-esp32
https://github.com/nodemcu/nodemcu-firmware/tree/dev-esp32

ESP32-C3-DevKitM-1 is an entry-level development board that uses small-sized ESP32-C3-MINI-1 modules. This development board has complete Wi-Fi and low power Bluetooth capabilities
ESP32-C3-MINI-1 is a universal Wi-Fi and low power Bluetooth dual-mode module with PCB on-board antenna. This module integrates a 4 MB embedded flash ESP32-C3FN4 chip.

CPU and on-chip memory:
Built-in ESP32-C3FN4 chip RISC-V 32-bit single-core microprocessor with a dominant frequency of up to 160 MHz
384 KB ROM
400KB SRAM (of which 16KB is dedicated to cache)
8 KB RTC SRAM
4MB embedded flash
Wi­Fi:
Support IEEE 802.11 B/g/n protocol
Center frequency range of working channel: 2412~2484 MHz
Supports 20 MHz and 40 MHz bandwidths in the 2.4 GHz band
Supports 1T1R mode with data rate up to 150 Mbps
Wireless Multimedia (WMM)
TX/RX A- MPDU, TX/RX A- MSDU
Immediate Block ACK
Fragmentation and defragmentation
Transmission opportunity, TXOP
Beacon Automatic Monitoring (Hardware TSF)
4 × Virtual Wi-Fi Interface
At the same time support Infrastructure BSS
Station mode, SoftAP mode, Station SoftAP mode and promiscuous mode Please note that when the ESP32-C3 series is scanned in Station mode, the SoftAP channel will change at the same time.
802.11 mc FTM
Bluetooth:
Advertising Extensions
Multiple Advertisement Sets
Channel Selection Algorithm #2
Wi-Fi and Bluetooth coexist and share the same antenna.
Peripheral:
GPIO, SPI, UART, I2C, I2S, remotecontrol peripheral, LED PWM controller, universal DMA controller