4.8/ 5.0
96% pembeli merasa puas
29 rating • 8 ulasan
5(26)89.66%
4(2)6.9%
3(0)0%
2(0)0%
1(1)3.45%
Atur jumlah dan catatan
Stok Total: Sisa 6
Subtotal
Rp285.000
SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)
Rp285.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: SENSOR
#17
INTRODUCTION
This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
Sensor Interface:
Brown VCC
Blue CLK
Black :GND
Yellow (White) DATA
option cable
Sensor Interface:
Red VCC
Green GND
Blue (Black) SDA
Yellow (White) SCL
SPECIFICATION
Operating Voltage: 3.3/5V
Communication Interface: I2C / IIC
Protection Class: waterproof anti-condensation
RH Response Time: 8s (tau63%)
Accuracy: ±3% RH / ±0.3 ℃
Measuring Range: 0-100% RH / -40-125 ℃
Dimension: 73mm * 17mm / 2.87 * 0.67 inches
Weight: 44g
INTRODUCTION
This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT20 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
Sensor Interface:
Brown VCC
Blue CLK
Black :GND
Yellow (White) DATA
option cable
Sensor Interface:
Red VCC
Green GND
Blue (Black) SDA
Yellow (White) SCL
SPECIFICATION
Operating Voltage: 3.3/5V
Communication Interface: I2C / IIC
Protection Class: waterproof anti-condensation
RH Response Time: 8s (tau63%)
Accuracy: ±3% RH / ±0.3 ℃
Measuring Range: 0-100% RH / -40-125 ℃
Dimension: 73mm * 17mm / 2.87 * 0.67 inches
Weight: 44g
Ada masalah dengan produk ini?