5.0/ 5.0
100% pembeli merasa puas
19 rating • 3 ulasan
5(19)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 418
Subtotal
Rp15.000
Waterproof DS18B20 Digital temperature sensor
Rp15.000
Introduction
This is a waterproofed version of the DS18B20 Temperature sensor.
Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances! The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.Usable with 3.0-5.5V systems.
Because each DS18B20 contains a unique silicon serial number, multiple DS18B20s can exist on the same 1-Wire bus. This allows for placing temperature sensors in many different places. Applications where this feature is useful include HVAC environmental controls, sensing temperatures inside buildings,equipment or machinery, and process monitoring and control.
With our plugable terminal, there is no soldering required to connect to our IO Expansion Shield.
Specification
Usable with 3.0V to 5.5V power/data
±0.5°C Accuracy from -10°C to +85°C
Usable temperature range: -55 to 125°C (-67°F to +257°F)
9 to 12 bit selectable resolution
Uses 1-Wire interface- requires only one digital pin for communication
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
Temperature-limit alarm system
Query time is less than 750ms
3 wires interface:
Type A
Red wire - VCC
Black wire - GND
Yellow wire - DATA
Type B (Recently there's a series of sensors using this pin mapping. Sorry for the inconvenience.)
Red wire - VCC
Yellow wire - GND
Green wire - DATA
Stainless steel tube 6mm diameter by 35mm long
Cable diameter: 4mm
Length: 90cm
Shipping List
Waterproof DS18B20 Digital temperature sensor (1 unit)
This is a waterproofed version of the DS18B20 Temperature sensor.
Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances! The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.Usable with 3.0-5.5V systems.
Because each DS18B20 contains a unique silicon serial number, multiple DS18B20s can exist on the same 1-Wire bus. This allows for placing temperature sensors in many different places. Applications where this feature is useful include HVAC environmental controls, sensing temperatures inside buildings,equipment or machinery, and process monitoring and control.
With our plugable terminal, there is no soldering required to connect to our IO Expansion Shield.
Specification
Usable with 3.0V to 5.5V power/data
±0.5°C Accuracy from -10°C to +85°C
Usable temperature range: -55 to 125°C (-67°F to +257°F)
9 to 12 bit selectable resolution
Uses 1-Wire interface- requires only one digital pin for communication
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
Temperature-limit alarm system
Query time is less than 750ms
3 wires interface:
Type A
Red wire - VCC
Black wire - GND
Yellow wire - DATA
Type B (Recently there's a series of sensors using this pin mapping. Sorry for the inconvenience.)
Red wire - VCC
Yellow wire - GND
Green wire - DATA
Stainless steel tube 6mm diameter by 35mm long
Cable diameter: 4mm
Length: 90cm
Shipping List
Waterproof DS18B20 Digital temperature sensor (1 unit)
Ada masalah dengan produk ini?